All MIBs › Printer-MIB › prtInputMaxCapacity
prtInputMaxCapacity
Module: Printer-MIB
OID (symbolic): Printer-MIB::prtInputMaxCapacity
OID (numeric): 1.3.6.1.2.1.43.8.2.1.9
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value reflects claimed capacity. If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Control Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown.
What is prtInputMaxCapacity?
This value reports (or, on trays without sensing hardware, lets an admin configure) the maximum media capacity of an input tray in the capacity units defined by the tray's PrtCapacityUnitTC; -1 means other/no restriction, -2 means unknown. It's used to let management software estimate how much paper a tray can hold before it needs refilling.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.8.2.1.9 snmpwalk -v2c -c public <target> Printer-MIB::prtInputMaxCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.8.2.1.9.1 snmpget -v2c -c public <target> Printer-MIB::prtInputMaxCapacity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.43.8.2.1.9.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Printer-MIB::prtInputMaxCapacity OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| 1.3.6.1.2.1.43.8 | prtInput | Printer-MIB |
| 1.3.6.1.2.1.43.8.2 | prtInputTable | Printer-MIB |
| 1.3.6.1.2.1.43.8.2.1 | prtInputEntry | Printer-MIB |
| 1.3.6.1.2.1.43.8.2.1.9 | prtInputMaxCapacity | Printer-MIB |