All MIBs › Printer-MIB › prtInputDimUnit
prtInputDimUnit
Module: Printer-MIB
OID (symbolic): Printer-MIB::prtInputDimUnit
OID (numeric): 1.3.6.1.2.1.43.8.2.1.3
Node type: OBJECT-TYPE
Type: PrtMediaUnitTC
Access: read-only
Description: The unit of measurement for use calculating and relaying dimensional values for this input sub-unit.
What is prtInputDimUnit?
This read-only value specifies the unit of measurement (for example tenths of millimeters or inches) that the printer uses when reporting dimensional values, like media width, for a specific input sub-unit. An admin needs this to correctly interpret related sizing fields such as prtInputMediaDimFeedDirDeclared.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.43.8.2.1.3 snmpwalk -v2c -c public <target> Printer-MIB::prtInputDimUnit
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.43.8.2.1.3.1 snmpget -v2c -c public <target> Printer-MIB::prtInputDimUnit.1
Start monitoring vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Printer-MIB::prtInputDimUnit OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network-attached printers and MFPs from any vendor (RFC 3805) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.43 | printmib | Printer-MIB |
| 1.3.6.1.2.1.43.8 | prtInput | Printer-MIB |
| 1.3.6.1.2.1.43.8.2 | prtInputTable | Printer-MIB |
| 1.3.6.1.2.1.43.8.2.1 | prtInputEntry | Printer-MIB |
| 1.3.6.1.2.1.43.8.2.1.3 | prtInputDimUnit | Printer-MIB |