PWG-IMAGING-COUNTER-MIB :: icMonitorStorageAllocWarnings

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPWG-IMAGING-COUNTER-MIBicMonitorStorageAllocWarnings

icMonitorStorageAllocWarnings

Module: PWG-IMAGING-COUNTER-MIB

OID (symbolic): PWG-IMAGING-COUNTER-MIB::icMonitorStorageAllocWarnings

OID (numeric): 1.3.6.1.4.1.2699.1.3.1.6.1.1.13

Node type: OBJECT-TYPE

Type: IcCounter32

Access: read-only

Description: Total times that data stored by this managed service or managed subunit to a local or remote file system exceeded an implementation-defined or administratively configured storage allocation threshold.

Note: This counter is intended to support increasing available storage on an Imaging System before job failures occur. At this time, there is no support for detection of storage allocation warnings (as opposed to errors) in any IETF standards-track MIB, except for the generic 'subunitRecoverableFailure(29)' value of PrtAlertCodeTC defined in the IANA Printer MIB (originally published in RFC 3805).

What is icMonitorStorageAllocWarnings?

Counts how many times this managed service or subunit's file-system storage usage crossed a configured or built-in warning threshold, intended to flag rising disk pressure before it causes a job failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2699.1.3.1.6.1.1.13
snmpwalk -v2c -c public <target> PWG-IMAGING-COUNTER-MIB::icMonitorStorageAllocWarnings

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2699.1.3.1.6.1.1.13.1
snmpget -v2c -c public <target> PWG-IMAGING-COUNTER-MIB::icMonitorStorageAllocWarnings.1

Start monitoring vendor-neutral, standards-based MIB, network multifunction printer/copier/scanner with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PWG-IMAGING-COUNTER-MIB::icMonitorStorageAllocWarnings OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network multifunction printer/copier/scanner from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2699.1.3imagingCounterMIBPWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1icMIBObjectsPWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1.6icMonitorPWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1.6.1icMonitorTablePWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1.6.1.1icMonitorEntryPWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1.6.1.1.13icMonitorStorageAllocWarningsPWG-IMAGING-COUNTER-MIB