PWG-IMAGING-COUNTER-MIB :: icMonitorMemoryAllocWarnings

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsPWG-IMAGING-COUNTER-MIBicMonitorMemoryAllocWarnings

icMonitorMemoryAllocWarnings

Module: PWG-IMAGING-COUNTER-MIB

OID (symbolic): PWG-IMAGING-COUNTER-MIB::icMonitorMemoryAllocWarnings

OID (numeric): 1.3.6.1.4.1.2699.1.3.1.6.1.1.11

Node type: OBJECT-TYPE

Type: IcCounter32

Access: read-only

Description: Total times that data stored by this managed service or managed subunit to local Imaging System memory exceeded an implementation-defined or administratively configured memory allocation threshold.

Note: This counter is intended to support increasing available memory on an Imaging System before job failures occur. At this time, there is no support for detection of memory allocation warnings (as opposed to errors) in any IETF standards-track MIB, except for the generic 'subunitRecoverableFailure(29)' value of PrtAlertCodeTC defined in the IANA Printer MIB (originally published in RFC 3805).

What is icMonitorMemoryAllocWarnings?

Counts how many times this managed service or subunit's memory usage crossed a configured or built-in warning threshold, intended to flag rising memory pressure before it causes a job failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2699.1.3.1.6.1.1.11
snmpwalk -v2c -c public <target> PWG-IMAGING-COUNTER-MIB::icMonitorMemoryAllocWarnings

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2699.1.3.1.6.1.1.11.1
snmpget -v2c -c public <target> PWG-IMAGING-COUNTER-MIB::icMonitorMemoryAllocWarnings.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> icMonitorMemoryAllocWarnings.1

Start monitoring vendor-neutral, standards-based MIB, network multifunction printer/copier/scanner with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PWG-IMAGING-COUNTER-MIB::icMonitorMemoryAllocWarnings OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, network multifunction printer/copier/scanner from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2699.1.3imagingCounterMIBPWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1icMIBObjectsPWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1.6icMonitorPWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1.6.1icMonitorTablePWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1.6.1.1icMonitorEntryPWG-IMAGING-COUNTER-MIB
1.3.6.1.4.1.2699.1.3.1.6.1.1.11icMonitorMemoryAllocWarningsPWG-IMAGING-COUNTER-MIB