All MIBs › PTP-MIB › swPTPBoundaryPortPDelayReqInterval
swPTPBoundaryPortPDelayReqInterval
Module: PTP-MIB
OID (symbolic): PTP-MIB::swPTPBoundaryPortPDelayReqInterval
OID (numeric): 1.3.6.1.4.1.171.12.94.1.2.2.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This indicates the permitted mean time interval between successive pdelay request messages.
In line with the IEEE1588 protocol, the value of pdelay req interval shall be represented as the logarithm to base 2 of this time measured in seconds. The range is 1-32, so the import value must be either 1, 2, 4, 8, 16 or 32. If the input is not allowed, then the input will be automatically adjusted to allow for the bigger and closest value.
What is swPTPBoundaryPortPDelayReqInterval?
A read-write value (1-32, auto-rounded to the nearest allowed power-of-two) setting the mean interval, as log2 seconds per IEEE 1588, between peer-delay request messages sent on this boundary-clock port. Admins tune this when using the peer-to-peer delay mechanism to balance measurement responsiveness against extra PTP traffic on the link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.12.94.1.2.2.1.5 snmpwalk -v2c -c public <target> PTP-MIB::swPTPBoundaryPortPDelayReqInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.12.94.1.2.2.1.5.1 snmpget -v2c -c public <target> PTP-MIB::swPTPBoundaryPortPDelayReqInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.12.94.1.2.2.1.5.1 i <value>
Start monitoring D-Link switches, e.g. layer-3 managed switch series, supporting IEEE 1588 PTP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PTP-MIB::swPTPBoundaryPortPDelayReqInterval OID value, configure state conditions and alerts, and monitor any D-Link switches, e.g. layer-3 managed switch series, supporting IEEE 1588 PTP from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.12 | dlink_common_mgmt | DLINK-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.12.94 | swPTPMIB | PTP-MIB |
| 1.3.6.1.4.1.171.12.94.1 | swPTPMIBObjects | PTP-MIB |
| 1.3.6.1.4.1.171.12.94.1.2 | swPTPPortCFG | PTP-MIB |
| 1.3.6.1.4.1.171.12.94.1.2.2 | swPTPBoundaryPortCFGTable | PTP-MIB |
| 1.3.6.1.4.1.171.12.94.1.2.2.1 | swPTPBoundaryPortCFGEntry | PTP-MIB |
| 1.3.6.1.4.1.171.12.94.1.2.2.1.5 | swPTPBoundaryPortPDelayReqInterval | PTP-MIB |