All MIBs › PRVT-SWITCH-MIB › reportsL2IfaceIfOutErrors
reportsL2IfaceIfOutErrors
Module: PRVT-SWITCH-MIB
OID (symbolic): PRVT-SWITCH-MIB::reportsL2IfaceIfOutErrors
OID (numeric): 1.3.6.1.4.1.738.1.5.100.3.1.1.1.22
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description:
The number of outbound packets that could not be transmitted because of errors.
What is reportsL2IfaceIfOutErrors?
This counter increments whenever an outbound packet cannot be transmitted due to errors on a Layer 2 interface. Causes include buffer exhaustion, CRC errors, or transmission failures. Switch operators monitor this to detect physical link problems or oversubscription conditions on egress interfaces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.5.100.3.1.1.1.22 snmpwalk -v2c -c public <target> PRVT-SWITCH-MIB::reportsL2IfaceIfOutErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.5.100.3.1.1.1.22.1 snmpget -v2c -c public <target> PRVT-SWITCH-MIB::reportsL2IfaceIfOutErrors.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5 | switch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100 | prvtSwitchMib | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.3 | reports | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.3.1 | reportsL2 | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.3.1.1 | reportsL2IfaceTable | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.3.1.1.1 | reportsL2IfaceEntry | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.3.1.1.1.22 | reportsL2IfaceIfOutErrors | PRVT-SWITCH-MIB |