All MIBs › PRVT-SWITCH-MIB › configL2IfaceFlow
configL2IfaceFlow
Module: PRVT-SWITCH-MIB
OID (symbolic): PRVT-SWITCH-MIB::configL2IfaceFlow
OID (numeric): 1.3.6.1.4.1.738.1.5.100.2.2.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The desired flow mode for the interface. If the selected control is not available on the interface, a value of illegal (99) is returned. If the port type does NOT support the default value of autonegotiate (1), then the application will initialize the port to a valid value (e.g., 1000full (6)).Note that not all controls are available for all interfaces. For example, only full-1000 (6) is available for Gigabit Ethernet interfaces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.5.100.2.2.2.1.8 snmpwalk -v2c -c public <target> PRVT-SWITCH-MIB::configL2IfaceFlow
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.5.100.2.2.2.1.8.1 snmpget -v2c -c public <target> PRVT-SWITCH-MIB::configL2IfaceFlow.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.738.1.5.100.2.2.2.1.8.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5 | switch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100 | prvtSwitchMib | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2 | config | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2.2 | configL2 | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2.2.2 | configL2IfaceTable | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2.2.2.1 | configL2IfaceEntry | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2.2.2.1.8 | configL2IfaceFlow | PRVT-SWITCH-MIB |