All MIBs › PRVT-SWITCH-MIB › configL2IfaceDuplexSpeedSet
configL2IfaceDuplexSpeedSet
Module: PRVT-SWITCH-MIB
OID (symbolic): PRVT-SWITCH-MIB::configL2IfaceDuplexSpeedSet
OID (numeric): 1.3.6.1.4.1.738.1.5.100.2.2.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The desired speed and duplex mode for the interface. If the selected control is not available for the interface, a value of illegal (99) is returned. If the port type does NOT support the default of autonegotiate (1), then the application will initialize the port to a valid value (e.g., 1000full (6)). Note that not all controls are available for all interfaces. For example, only full-1000 (6) is available for Gigabit Ethernet interfaces.
As this object was marked as obsolete the following two configurable parameters of an interface should be used: configL2IfaceDuplexModeSet, configL2IfaceSpeedSet
What is configL2IfaceDuplexSpeedSet?
This is an obsolete combined speed/duplex selector for the interface (e.g. half-10, full-100, full-1000); the MIB explicitly directs admins to use configL2IfaceDuplexModeSet and configL2IfaceSpeedSet instead, since a value of illegal(99) is returned if the chosen combination isn't supported on this port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.5.100.2.2.2.1.7 snmpwalk -v2c -c public <target> PRVT-SWITCH-MIB::configL2IfaceDuplexSpeedSet
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.5.100.2.2.2.1.7.1 snmpget -v2c -c public <target> PRVT-SWITCH-MIB::configL2IfaceDuplexSpeedSet.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.738.1.5.100.2.2.2.1.7.1 i <value>
Start monitoring BATM/Telco Systems carrier Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-SWITCH-MIB::configL2IfaceDuplexSpeedSet OID value, configure state conditions and alerts, and monitor any BATM/Telco Systems carrier Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5 | switch | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100 | prvtSwitchMib | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2 | config | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2.2 | configL2 | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2.2.2 | configL2IfaceTable | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2.2.2.1 | configL2IfaceEntry | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5.100.2.2.2.1.7 | configL2IfaceDuplexSpeedSet | PRVT-SWITCH-MIB |