All MIBs › PRVT-EPS-MIB › prvtEpsServiceDefectsPresent
prvtEpsServiceDefectsPresent
Module: PRVT-EPS-MIB
OID (symbolic): PRVT-EPS-MIB::prvtEpsServiceDefectsPresent
OID (numeric): 1.3.6.1.4.1.738.1.5.132.1.1.1.1.15
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Defects registered by the APS protocol could be either none or a composition of bits 0-3:
fullyIncompatibleProvisioning(0) - occurs upon reception of three APS frames with the incompatible 'B' bit value within the 22.5 second period;
protectionSwitchingIncomplete(1) - occurs if the transmitted 'Requested Signal' and the received 'Bridged Signal' do not match for a period of 50ms or longer;
protectionConfigurationMismatch(2) - working/protection configuration mismatch, occurs at the reception of three APS frames from the working transport entity within the 22.5 second period;
epsConfigurationMismatch(3) - provisioning mismatch - for example, the local device is set to revertive mode and the remote device is set to non-revertive mode.
What is prvtEpsServiceDefectsPresent?
A bitmap of APS protocol defects currently detected: fullyIncompatibleProvisioning (mismatched APS frame 'B' bit seen repeatedly), protectionSwitchingIncomplete (requested vs bridged signal mismatch lasting 50ms+), protectionConfigurationMismatch (conflicting working/protection setup between ends), and epsConfigurationMismatch (e.g. one side set revertive while the other is non-revertive).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.738.1.5.132.1.1.1.1.15 snmpwalk -v2c -c public <target> PRVT-EPS-MIB::prvtEpsServiceDefectsPresent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.738.1.5.132.1.1.1.1.15.1 snmpget -v2c -c public <target> PRVT-EPS-MIB::prvtEpsServiceDefectsPresent.1
Start monitoring BATM Advanced Communication / Telco Systems T-Metro carrier Ethernet switches (G.8031 linear protection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRVT-EPS-MIB::prvtEpsServiceDefectsPresent OID value, configure state conditions and alerts, and monitor any BATM Advanced Communication / Telco Systems T-Metro carrier Ethernet switches (G.8031 linear protection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.738 | privateVendorOID | PRIV-VENDORDEF-MIB |
| 1.3.6.1.4.1.738.1 | prvt_products | PRVT-SWITCH-MIB |
| 1.3.6.1.4.1.738.1.5 | switch | PRVT-SWITCH-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.738.1.5.132 | prvtEpsMIB | PRVT-EPS-MIB |
| 1.3.6.1.4.1.738.1.5.132.1 | prvtEpsMIBObjects | PRVT-EPS-MIB |
| 1.3.6.1.4.1.738.1.5.132.1.1 | prvtEpsService | PRVT-EPS-MIB |
| 1.3.6.1.4.1.738.1.5.132.1.1.1 | prvtEpsServiceTable | PRVT-EPS-MIB |
| 1.3.6.1.4.1.738.1.5.132.1.1.1.1 | prvtEpsServiceEntry | PRVT-EPS-MIB |
| 1.3.6.1.4.1.738.1.5.132.1.1.1.1.15 | prvtEpsServiceDefectsPresent | PRVT-EPS-MIB |