All MIBs › PROTECTION-MIB › sncWorkingTriggerType
sncWorkingTriggerType
Module: PROTECTION-MIB
OID (symbolic): PROTECTION-MIB::sncWorkingTriggerType
OID (numeric): 1.3.6.1.4.1.1038.130.30.2.1.8
Node type: OBJECT-TYPE
Type: TriggerCriterion
Access: read-write
Description: The value of this field is the criterion to trigger a switch for the Working Input Connection Point.SNC/I uses SF criterion for switching: TU-AIS/TU-LOP for VC12/VC3 , AU-AIS/AU-LOP for VC4 and , by extension, ppiLOS and ppiAIS for pdh inputs. SNC/N uses also SD criterion for switching: SD-V5 for VC12, SD-B3 for VC3/VC4. SNC+LAN adds MS-RDI as switching criterion for LAN connection. NONE means that just board extractions and some board failures activate switching.
What is sncWorkingTriggerType?
Criterion that triggers a protection switch away from the Working input for this SNC entry - SNC/I uses Signal Fail conditions (TU-AIS/TU-LOP for VC12/VC3, AU-AIS/AU-LOP for VC4, or LOS/AIS for PDH inputs), SNC/N adds Signal Degrade (SD-V5/SD-B3), SNC+LAN adds MS-RDI for LAN connections, and NONE means only board extraction/failure triggers a switch. An admin picks the trigger type matching the SNC variant in use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.130.30.2.1.8 snmpwalk -v2c -c public <target> PROTECTION-MIB::sncWorkingTriggerType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.130.30.2.1.8.1 snmpget -v2c -c public <target> PROTECTION-MIB::sncWorkingTriggerType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.130.30.2.1.8.1 s <value>
Start monitoring SAGEM SDH/radio link transmission equipment (protection switching) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROTECTION-MIB::sncWorkingTriggerType OID value, configure state conditions and alerts, and monitor any SAGEM SDH/radio link transmission equipment (protection switching) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.130 | protection | PROTECTION-MIB |
| 1.3.6.1.4.1.1038.130.30 | sncp | PROTECTION-MIB |
| 1.3.6.1.4.1.1038.130.30.2 | sncTable | PROTECTION-MIB |
| 1.3.6.1.4.1.1038.130.30.2.1 | sncEntry | PROTECTION-MIB |
| 1.3.6.1.4.1.1038.130.30.2.1.8 | sncWorkingTriggerType | PROTECTION-MIB |