All MIBs › PROTECTION-MIB › mspCommand
mspCommand
Module: PROTECTION-MIB
OID (symbolic): PROTECTION-MIB::mspCommand
OID (numeric): 1.3.6.1.4.1.1038.130.10.2.1.11
Node type: OBJECT-TYPE
Type: MspCommand
Access: read-write
Description: Manual or forced commands can be apply to the protection switch. The forced and manual switch can be refused or cleared by equipment if a higher priority APS command is received or if the protection chanel is down. When this field is set to manual or forced, the mspTraffic field becomes read-write, and a set can be issued to specifie on which chanel the command does apply. Commands: LP (Lockout of Protection) LW (Lockout of Working channel) FSW (Forced Switch of a Working channel to protection) FSP (Forced Switch of a Protection channel to working) case 1+1 MSW (Manual Switch of a Working channel to protection) MSp (Manual Switch of a Protection channel to working) case 1+1 EXER (EXERcise)
What is mspCommand?
Issues a manual or forced protection command against this MSP entry (e.g. Lockout of Protection, Forced Switch, Manual Switch, Exercise). Setting a manual/forced command also makes mspTraffic writable so the admin can specify exactly which channel the command targets; the equipment may still refuse or clear the command if a higher-priority APS event occurs or the protection channel is down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1038.130.10.2.1.11 snmpwalk -v2c -c public <target> PROTECTION-MIB::mspCommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1038.130.10.2.1.11.1 snmpget -v2c -c public <target> PROTECTION-MIB::mspCommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1038.130.10.2.1.11.1 s <value>
Start monitoring SAGEM SDH/radio link transmission equipment (protection switching) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PROTECTION-MIB::mspCommand OID value, configure state conditions and alerts, and monitor any SAGEM SDH/radio link transmission equipment (protection switching) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1038 | sagemDr | SAGEM-DR-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1038.130 | protection | PROTECTION-MIB |
| 1.3.6.1.4.1.1038.130.10 | msp | PROTECTION-MIB |
| 1.3.6.1.4.1.1038.130.10.2 | mspTable | PROTECTION-MIB |
| 1.3.6.1.4.1.1038.130.10.2.1 | mspEntry | PROTECTION-MIB |
| 1.3.6.1.4.1.1038.130.10.2.1.11 | mspCommand | PROTECTION-MIB |