All MIBs › PRINTER-PORT-MONITOR-MIB › ppmPortProtocolTargetPort
ppmPortProtocolTargetPort
Module: PRINTER-PORT-MONITOR-MIB
OID (symbolic): PRINTER-PORT-MONITOR-MIB::ppmPortProtocolTargetPort
OID (numeric): 1.3.6.1.4.1.2699.1.2.1.3.1.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The transport (TCP, UDP, etc.) target port number for this protocol, i.e., an alternate port from the protocol default, or zero if not specified (use protocol default). This object MAY be used for any print protocol (from the Internet, NetWare, AppleTalk, or other protocol suite).
If this object is zero, then the actual target port number is the default port for the specified 'ppmPortProtocolType' (e.g., 'chPort9100(11)' uses '9100').
If this object is non-zero, then it SHOULD NOT conflict with the default (e.g., IANA-registered) target port implied by the value of 'ppmPortProtocolType' or the explicit transport target port specified in 'ppmPortServiceNameOrURI'. In case of conflict, the URI value in 'ppmPortServiceNameOrURI' is authoritative (e.g., 'ipp://example.com:631/~smith/printer').
If 'ppmPortProtocolType' is 'chLPDServer(8)', then this object MUST be ignored (because LPR target port is fixed at '515').
What is ppmPortProtocolTargetPort?
This object specifies the TCP/UDP target port number to use for this printer port's protocol, overriding the protocol's normal default port. Admins set a non-default value here when a printer or network configuration requires listening on an unusual port, while a value of zero tells clients to fall back to the protocol's standard default (e.g., 9100 for raw printing). For example, setting this to 9101 would redirect raw-printing clients to connect on port 9101 instead of the usual 9100.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2699.1.2.1.3.1.1.6 snmpwalk -v2c -c public <target> PRINTER-PORT-MONITOR-MIB::ppmPortProtocolTargetPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2699.1.2.1.3.1.1.6.1 snmpget -v2c -c public <target> PRINTER-PORT-MONITOR-MIB::ppmPortProtocolTargetPort.1
Start monitoring vendor-neutral, standards-based MIB (PWG printer port-monitor support) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PRINTER-PORT-MONITOR-MIB::ppmPortProtocolTargetPort OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (PWG printer port-monitor support) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2699.1.2 | ppmMIB | PRINTER-PORT-MONITOR-MIB |
| 1.3.6.1.4.1.2699.1.2.1 | ppmMIBObjects | PRINTER-PORT-MONITOR-MIB |
| 1.3.6.1.4.1.2699.1.2.1.3 | ppmPort | PRINTER-PORT-MONITOR-MIB |
| 1.3.6.1.4.1.2699.1.2.1.3.1 | ppmPortTable | PRINTER-PORT-MONITOR-MIB |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1 | ppmPortEntry | PRINTER-PORT-MONITOR-MIB |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.6 | ppmPortProtocolTargetPort | PRINTER-PORT-MONITOR-MIB |