PPPOE-MIB :: pPPoEBindingsEnabled

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PPPOE-MIB › pPPoEBindingsEnabled

pPPoEBindingsEnabled

Module: PPPOE-MIB

OID (symbolic): PPPOE-MIB::pPPoEBindingsEnabled

OID (numeric): 1.3.6.1.3.9999.1.1.2.1.1.2

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Whether pppoe is enabled or not.

What is pPPoEBindingsEnabled?

Turns PPPoE on or off for this Ethernet interface; disabled (false) by default, so the interface won't process PPPoE discovery/session traffic until this is set true.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.3.9999.1.1.2.1.1.2
snmpwalk -v2c -c public <target> PPPOE-MIB::pPPoEBindingsEnabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.3.9999.1.1.2.1.1.2.1
snmpget -v2c -c public <target> PPPOE-MIB::pPPoEBindingsEnabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.3.9999.1.1.2.1.1.2.1 s <value>

Start monitoring Broadband remote access servers (BRAS)/DSL aggregation switches, vendor-neutral IETF PPPoE MIB with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PPPOE-MIB::pPPoEBindingsEnabled OID value, configure state conditions and alerts, and monitor any Broadband remote access servers (BRAS)/DSL aggregation switches, vendor-neutral IETF PPPoE MIB from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.3experimentalAPERTUS-NPG-MIB
1.3.6.1.3.9999mplsCemMIBMPLS-CEM-MIB
1.3.6.1.3.9999.1mplsCemObjectsMPLS-CEM-MIB
1.3.6.1.3.9999.1.1mplsCemVcIndexNextMPLS-CEM-MIB
1.3.6.1.3.9999.1.1.2pcePcepClientIndexNextPCE-PCEP-DRAFT-MIB
Numeric OIDNameModule
1.3.6.1.3.9999.1.1.2.1pPPoEBindingsTablePPPOE-MIB
1.3.6.1.3.9999.1.1.2.1.1pPPoEBindingsEntryPPPOE-MIB
1.3.6.1.3.9999.1.1.2.1.1.2pPPoEBindingsEnabledPPPOE-MIB