All MIBs › PPP-BRIDGE-NCP-MIB › pppBridgeMediaConfigLocalStatus
pppBridgeMediaConfigLocalStatus
Module: PPP-BRIDGE-NCP-MIB
OID (symbolic): PPP-BRIDGE-NCP-MIB::pppBridgeMediaConfigLocalStatus
OID (numeric): 1.3.6.1.2.1.10.23.4.4.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates whether the local PPP Bridging Entity should accept packets of the protocol type identified in pppBridgeMediaConfigMacType on the PPP link identified by ifIndex or not. Setting this object to the value dont-accept has the affect of invalidating the corresponding entry in the pppBridgeMediaConfigTable object. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Changing this object will have effect when the link is next restarted.
What is pppBridgeMediaConfigLocalStatus?
This read-write object configures whether the local PPP Bridging entity should accept packets of the MAC type identified by pppBridgeMediaConfigMacType on this link, taking accept(1) or dont-accept(2); the change only takes effect when the link is next restarted. Admins use dont-accept(2) to effectively invalidate a table entry, though implementations may leave stale entries visible so management stations must tolerate rows no longer in active use. For example, an admin sets this to dont-accept(2) to stop bridging a given MAC type over a PPP link, then restarts the link for the change to take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.23.4.4.1.2 snmpwalk -v2c -c public <target> PPP-BRIDGE-NCP-MIB::pppBridgeMediaConfigLocalStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.23.4.4.1.2.1 snmpget -v2c -c public <target> PPP-BRIDGE-NCP-MIB::pppBridgeMediaConfigLocalStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.23.4.4.1.2.1 i <value>
Start monitoring vendor-neutral, standards-based MIB, RFC 1474 (PPP Bridging NCP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PPP-BRIDGE-NCP-MIB::pppBridgeMediaConfigLocalStatus OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, RFC 1474 (PPP Bridging NCP) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.23 | ppp | MRVINREACH |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.23.4 | pppBridge | PPP-BRIDGE-NCP-MIB |
| 1.3.6.1.2.1.10.23.4.4 | pppBridgeMediaConfigTable | PPP-BRIDGE-NCP-MIB |
| 1.3.6.1.2.1.10.23.4.4.1 | pppBridgeMediaConfigEntry | PPP-BRIDGE-NCP-MIB |
| 1.3.6.1.2.1.10.23.4.4.1.2 | pppBridgeMediaConfigLocalStatus | PPP-BRIDGE-NCP-MIB |