PPP-BRIDGE-NCP-MIB :: pppBridgeLocalToRemoteTinygramCompression

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PPP-BRIDGE-NCP-MIB › pppBridgeLocalToRemoteTinygramCompression

pppBridgeLocalToRemoteTinygramCompression

Module: PPP-BRIDGE-NCP-MIB

OID (symbolic): PPP-BRIDGE-NCP-MIB::pppBridgeLocalToRemoteTinygramCompression

OID (numeric): 1.3.6.1.2.1.10.23.4.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Indicates whether the local node will perform Tinygram Compression when sending packets to the remote entity. If false then the local entity will not perform Tinygram Compression. If true then the local entity will perform Tinygram Compression. The value of this object is meaningful only when the link has reached the open state (pppBridgeOperStatus is opened).

What is pppBridgeLocalToRemoteTinygramCompression?

This read-only flag shows whether the local PPP entity will apply Tinygram Compression (per RFC1220 section 6.7) when sending bridged frames to the remote peer over this ifIndex link. It matters for admins troubleshooting undersized-frame handling on bridged PPP links, since the value is only meaningful once pppBridgeOperStatus has reached opened. For instance, true(2) tells an admin the local side is shrinking small (tinygram) Ethernet frames before transmission, so packet captures on the wire may show fewer, larger frames than the LAN side generated.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.23.4.1.1.2
snmpwalk -v2c -c public <target> PPP-BRIDGE-NCP-MIB::pppBridgeLocalToRemoteTinygramCompression

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.23.4.1.1.2.1
snmpget -v2c -c public <target> PPP-BRIDGE-NCP-MIB::pppBridgeLocalToRemoteTinygramCompression.1

Start monitoring vendor-neutral, standards-based MIB, RFC 1474 (PPP Bridging NCP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PPP-BRIDGE-NCP-MIB::pppBridgeLocalToRemoteTinygramCompression OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB, RFC 1474 (PPP Bridging NCP) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.23pppMRVINREACH
Numeric OIDNameModule
1.3.6.1.2.1.10.23.4pppBridgePPP-BRIDGE-NCP-MIB
1.3.6.1.2.1.10.23.4.1pppBridgeTablePPP-BRIDGE-NCP-MIB
1.3.6.1.2.1.10.23.4.1.1pppBridgeEntryPPP-BRIDGE-NCP-MIB
1.3.6.1.2.1.10.23.4.1.1.2pppBridgeLocalToRemoteTinygramCompressionPPP-BRIDGE-NCP-MIB