All MIBs › POWERCONNECT5012-MIB › configIpFilter
configIpFilter
Module: POWERCONNECT5012-MIB
OID (symbolic): POWERCONNECT5012-MIB::configIpFilter
OID (numeric): 1.3.6.1.4.1.674.10895.2.11.35
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Determines if access to the device is limited to only those IP addresses specified in the configIpFilterTable.
What is configIpFilter?
This read-write flag, when enabled, restricts management access to only the IP addresses listed in the configIpFilterTable. Admins enable this to lock down which specific hosts can manage the switch over the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.2.11.35 snmpwalk -v2c -c public <target> POWERCONNECT5012-MIB::configIpFilter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.2.11.35.1 snmpget -v2c -c public <target> POWERCONNECT5012-MIB::configIpFilter.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.2.11.35.1 i <value>
Start monitoring Dell PowerConnect 5012 switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the POWERCONNECT5012-MIB::configIpFilter OID value, configure state conditions and alerts, and monitor any Dell PowerConnect 5012 switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.2 | powerconnect5012 | POWERCONNECT5012-MIB |
| 1.3.6.1.4.1.674.10895.2.11 | dellConfigGroup | POWERCONNECT5012-MIB |
| 1.3.6.1.4.1.674.10895.2.11.35 | configIpFilter | POWERCONNECT5012-MIB |