All MIBs › POLICY-MIB › ipPolicyRuleOperation

ipPolicyRuleOperation

OID (symbolic): POLICY-MIB::ipPolicyRuleOperation

OID (numeric): 1.3.6.1.4.1.81.36.2.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The operation that should be applied to a packet in case the packet matches the rule. Some of the values are Access Control operations and some are priority operations.

What is ipPolicyRuleOperation?

This specifies the action to take on traffic matching this rule, such as permit or deny. An admin sets this to decide whether matched traffic is allowed through or blocked.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.36.2.1.14
snmpwalk -v2c -c public <target> POLICY-MIB::ipPolicyRuleOperation

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.81.36.2.1.14.1
snmpget -v2c -c public <target> POLICY-MIB::ipPolicyRuleOperation.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.81.36.2.1.14.1 i <value>

Start monitoring vendor-neutral, standards-based MIB (generic IP policy rule management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the POLICY-MIB::ipPolicyRuleOperation OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based MIB (generic IP policy rule management) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.81	lannet	GEN-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.81.36	ipPolicyMgmt	POLICY-MIB
1.3.6.1.4.1.81.36.2	ipPolicyRuleTable	POLICY-MIB
1.3.6.1.4.1.81.36.2.1	ipPolicyRuleEntry	POLICY-MIB
1.3.6.1.4.1.81.36.2.1.14	ipPolicyRuleOperation	POLICY-MIB

POLICY-MIB :: ipPolicyRuleOperation

ipPolicyRuleOperation

Module

This MIB depends on