PNNI-MOB-EXT-MIB :: pnniInputOnhlMobileIfSource

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › PNNI-MOB-EXT-MIB › pnniInputOnhlMobileIfSource

pnniInputOnhlMobileIfSource

Module: PNNI-MOB-EXT-MIB

OID (symbolic): PNNI-MOB-EXT-MIB::pnniInputOnhlMobileIfSource

OID (numeric): 1.3.6.1.4.1.353.5.4.2.1.2.5.1.4

Node type: OBJECT-TYPE

Type: InterfaceIndex

Access: read-only

Description: If pnniInputOnhlSourceType has the value of 'mobileInterface', this attributes contains the index in the pnniIfTable of the mobile interface from which the outside nodal hierarchy list was generated.

For all other values of pnniInputOnhlSourceType, this attribute has a value of 0.

What is pnniInputOnhlMobileIfSource?

This reports the pnniIfTable index of the mobile interface that generated this candidate outside nodal hierarchy list, but only when the entry's source type is mobileInterface; otherwise it's zero. An admin uses this to trace a candidate hierarchy list back to the exact physical PNNI interface it arrived on when troubleshooting mobility-related decision process behavior. For example, an entry with source type mobileInterface and this value set to 4 identifies interface 4 as the origin of that hierarchy list.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.5.4.2.1.2.5.1.4
snmpwalk -v2c -c public <target> PNNI-MOB-EXT-MIB::pnniInputOnhlMobileIfSource

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.353.5.4.2.1.2.5.1.4.1
snmpget -v2c -c public <target> PNNI-MOB-EXT-MIB::pnniInputOnhlMobileIfSource.1

Start monitoring vendor-neutral, standards-based ATM Forum MIB, mobile ATM switches/nodes (PNNI mobility extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PNNI-MOB-EXT-MIB::pnniInputOnhlMobileIfSource OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based ATM Forum MIB, mobile ATM switches/nodes (PNNI mobility extensions) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.353atmForumATM-DXI-MIB
1.3.6.1.4.1.353.5atmForumNetworkManagementATM-FORUM-SNMP-M4-MIB
1.3.6.1.4.1.353.5.4atmfPnniPNNI-MIB
Numeric OIDNameModule
1.3.6.1.4.1.353.5.4.2pnniMobExtMIBPNNI-MOB-EXT-MIB
1.3.6.1.4.1.353.5.4.2.1pnniMobExtMIBObjectsPNNI-MOB-EXT-MIB
1.3.6.1.4.1.353.5.4.2.1.2pnniMobileSwitchGroupPNNI-MOB-EXT-MIB
1.3.6.1.4.1.353.5.4.2.1.2.5pnniMSInputOnhlTablePNNI-MOB-EXT-MIB
1.3.6.1.4.1.353.5.4.2.1.2.5.1pnniMSInputOnhlEntryPNNI-MOB-EXT-MIB
1.3.6.1.4.1.353.5.4.2.1.2.5.1.4pnniInputOnhlMobileIfSourcePNNI-MOB-EXT-MIB