All MIBs › PNNI-MOB-EXT-MIB › pnniAPMobileIfNhlLevelFilter
pnniAPMobileIfNhlLevelFilter
Module: PNNI-MOB-EXT-MIB
OID (symbolic): PNNI-MOB-EXT-MIB::pnniAPMobileIfNhlLevelFilter
OID (numeric): 1.3.6.1.4.1.353.5.4.2.1.3.1.1.1
Node type: OBJECT-TYPE
Type: PnniLevel
Access: read-write
Description: This attribute is used to apply a mask on the nodal hierarchy list advertised in HELLO protocol on this specific interface.
The value of this attribute specifies the highest level of the PNNI hierarchy advertised in the nodal hierarchy list. In other words, any entry of the nodal hierarchy list that has a value for the level smaller than the value of this attribute is not advertised.
A value of zero indicates that no filter is applied
What is pnniAPMobileIfNhlLevelFilter?
This sets a level filter that masks which levels of the nodal hierarchy list get advertised in the HELLO protocol on this specific access point interface, with zero meaning no filtering is applied. An admin raises this value to suppress advertising lower, numerically higher-value, hierarchy levels than the configured threshold, limiting how much of the local hierarchy is exposed to a mobile peer on that interface. For example, setting this to 48 would prevent the interface from advertising any nodal hierarchy list entries at levels numerically greater than 48.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.353.5.4.2.1.3.1.1.1 snmpwalk -v2c -c public <target> PNNI-MOB-EXT-MIB::pnniAPMobileIfNhlLevelFilter
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.353.5.4.2.1.3.1.1.1.1 snmpget -v2c -c public <target> PNNI-MOB-EXT-MIB::pnniAPMobileIfNhlLevelFilter.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.353.5.4.2.1.3.1.1.1.1 s <value>
Start monitoring vendor-neutral, standards-based ATM Forum MIB, mobile ATM switches/nodes (PNNI mobility extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PNNI-MOB-EXT-MIB::pnniAPMobileIfNhlLevelFilter OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based ATM Forum MIB, mobile ATM switches/nodes (PNNI mobility extensions) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-DXI-MIB |
| 1.3.6.1.4.1.353.5 | atmForumNetworkManagement | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.5.4 | atmfPnni | PNNI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.353.5.4.2 | pnniMobExtMIB | PNNI-MOB-EXT-MIB |
| 1.3.6.1.4.1.353.5.4.2.1 | pnniMobExtMIBObjects | PNNI-MOB-EXT-MIB |
| 1.3.6.1.4.1.353.5.4.2.1.3 | pnniAccessPointGroup | PNNI-MOB-EXT-MIB |
| 1.3.6.1.4.1.353.5.4.2.1.3.1 | pnniAPMobileIfTable | PNNI-MOB-EXT-MIB |
| 1.3.6.1.4.1.353.5.4.2.1.3.1.1 | pnniAPMobileIfEntry | PNNI-MOB-EXT-MIB |
| 1.3.6.1.4.1.353.5.4.2.1.3.1.1.1 | pnniAPMobileIfNhlLevelFilter | PNNI-MOB-EXT-MIB |