All MIBs › PNNI-MIB › pnniMetrics5
pnniMetrics5
Module: PNNI-MIB
OID (symbolic): PNNI-MIB::pnniMetrics5
OID (numeric): 1.3.6.1.4.1.353.5.4.1.1.18.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description:
An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories.
For PNNI, this is the cell loss ratio for CLP=0 traffic for the specified service categories. The cell loss ratio value is computed as 10**(-n) where 'n' is the value returned in this variable.
If this parameter is not used, its value should be set to 0xFFFFFFFF.
What is pnniMetrics5?
This object defines an alternate routing parameter (specifically cell loss ratio for CLP=0 traffic) used in Private Network-to-Network Interface (PNNI) routing decisions, expressed as 10 to the negative power of the stored value. It is configured by network administrators to control how ATM switches advertise the quality of service characteristics of links for specific service categories. Operators adjust this value during capacity planning or when optimizing routes for voice, video, or data traffic on ATM networks.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.353 | atmForum | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.5 | atmForumNetworkManagement | ATM-FORUM-SNMP-M4-MIB |
| 1.3.6.1.4.1.353.5.4 | atmfPnni | PNNI-MIB |
| 1.3.6.1.4.1.353.5.4.1 | pnniMIB | PNNI-MIB |
| 1.3.6.1.4.1.353.5.4.1.1 | pnniMIBObjects | PNNI-MIB |
| 1.3.6.1.4.1.353.5.4.1.1.18 | pnniMetricsTable | PNNI-MIB |
| 1.3.6.1.4.1.353.5.4.1.1.18.1 | pnniMetricsEntry | PNNI-MIB |
| 1.3.6.1.4.1.353.5.4.1.1.18.1.11 | pnniMetrics5 | PNNI-MIB |