All MIBs › PERSEUS-MIB › lsConPortIFM
lsConPortIFM
Module: PERSEUS-MIB
OID (symbolic): PERSEUS-MIB::lsConPortIFM
OID (numeric): 1.3.6.1.4.1.43.18.2.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls the Intelligent Flow Management for the port. It specifies what action a port takes whenever it is unable to receive a packet because its buffers are full. If the it is set to off(1), the packet is dropped and no jam signal is transmitted. If the attribute is set to any of the values maxJams6(2) to maxJams13(10), a jam signal is applied to the segment attached to this port in order to backoff the transmitting station. This will be repeated a maximum of 6 to 13 times depending on the setting. If the port is then still unable to receive the packet it is dropped. Intelligent Flow Management should be disabled on ports which are connected to repeated segments.
What is lsConPortIFM?
Configures Intelligent Flow Management for this port: off(2) silently drops packets when receive buffers are full, while maxJams6(3) through maxJams13(10) instead jam the segment to force the sending station to back off, retrying 6 to 13 times before giving up. It should be disabled on ports connected to repeated segments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.18.2.1.1.6 snmpwalk -v2c -c public <target> PERSEUS-MIB::lsConPortIFM
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.18.2.1.1.6.1 snmpget -v2c -c public <target> PERSEUS-MIB::lsConPortIFM.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.18.2.1.1.6.1 i <value>
Start monitoring 3Com Perseus LinkSwitch 1000 stackable Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PERSEUS-MIB::lsConPortIFM OID value, configure state conditions and alerts, and monitor any 3Com Perseus LinkSwitch 1000 stackable Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.18 | linkSwitch1000_mib | A3Com-products-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.18.2 | linkSwitchConfigGroup | PERSEUS-MIB |
| 1.3.6.1.4.1.43.18.2.1 | lsConfigPortTable | PERSEUS-MIB |
| 1.3.6.1.4.1.43.18.2.1.1 | lsConfigPortEntry | PERSEUS-MIB |
| 1.3.6.1.4.1.43.18.2.1.1.6 | lsConPortIFM | PERSEUS-MIB |