All MIBs › PERIPHONICS-VRU-NETWORK-MIB › lineProtocol
lineProtocol
Module: PERIPHONICS-VRU-NETWORK-MIB
OID (symbolic): PERIPHONICS-VRU-NETWORK-MIB::lineProtocol
OID (numeric): 1.3.6.1.4.1.1357.1.4.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: A value which indicates the set of protocols this phone line offers. The value is a sum. This value initially takes the value of zero which indicates that the protocol is unknown. Then for each protocol that this line supports, its protocol value is added to the sum.
Value Functionality 0x00001 Uses some other type of protocol 0x00002 Some analog protocol 0x00004 AT&T Bell release 0x00008 British Paging (BTUK/MCP) 0x00010 Channel bank with 2 wire option 0x00020 Channel bank with 2 wire FXOR else FXO 0x00040 Channel bank with 4 wire E&M 0x00080 Channel bank FSX[r] else FXO[R] 0x00100 Channel bank loop start else ground 0x00200 Channel bank standard access 0x00400 Common channel signalling (SS7) 0x00800 Galaxy 5/2 ACD 0x01000 ISDN 0x02000 Loop hangup supervision 0x04000 Mercury CAS signalling 0x08000 Network side protocol 0x10000 R1 signaling system 0x20000 R2 signaling with DTMF outdial 0x40000 R2 signaling system
What is lineProtocol?
This read-only bitmask value sums flag bits identifying which telephony signaling protocols this phone line supports (e.g. 0x00400 for SS7, 0x01000 for ISDN, 0x40000 for R2), with 0 meaning unknown. An admin decodes this value to confirm a line is provisioned with the expected signaling protocol for its trunk type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1357.1.4.1.4 snmpwalk -v2c -c public <target> PERIPHONICS-VRU-NETWORK-MIB::lineProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1357.1.4.1.4.1 snmpget -v2c -c public <target> PERIPHONICS-VRU-NETWORK-MIB::lineProtocol.1
Start monitoring Periphonics VRU (Voice Response Unit), IVR telephony system (alarm/event log) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PERIPHONICS-VRU-NETWORK-MIB::lineProtocol OID value, configure state conditions and alerts, and monitor any Periphonics VRU (Voice Response Unit), IVR telephony system (alarm/event log) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1357 | periphonics | PERIPHONICS-MIB |
| 1.3.6.1.4.1.1357.1 | vruNetwork | PERIPHONICS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1357.1.4 | lineTable | PERIPHONICS-VRU-NETWORK-MIB |
| 1.3.6.1.4.1.1357.1.4.1 | lineTableEntry | PERIPHONICS-VRU-NETWORK-MIB |
| 1.3.6.1.4.1.1357.1.4.1.4 | lineProtocol | PERIPHONICS-VRU-NETWORK-MIB |