All MIBs › PEGASUS-MIB › dslLinkLineRate
dslLinkLineRate
Module: PEGASUS-MIB
OID (symbolic): PEGASUS-MIB::dslLinkLineRate
OID (numeric): 1.3.6.1.4.1.6368.2.1.2.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Number of 64Kbit timeslots per second. The signal on the DSL link is structured as 166 2/3 frames with 48 blocks each, for a total of 8000 blocks per second. Each block contains 3 to 36 bytes (also called timeslots), as configured by this object. The bit rate of the DSL link is derived from this value. Individual timeslots can be used for data, for voice, or for voice related signalling data (D-channels). The number of data and voice timeslots is configured with dslLinkDataRate and dslLinkNumberOfBRA. The value of this variable cannot be set outside the range of 3..36, inclusive. It should be chosen such that the following conditions hold: if dslLinkNumberOfBRA is zero dslLinkLineRate >= dslLinkDataRate if dslLinkNumberOfBRA is not zero dslLinkLineRate >= dslLinkDataRate + 2*dslLinkNumberOfBRA + 1 If the value violates this condition, the DSL link raises a 'configuration' alarm.
What is dslLinkLineRate?
The number of 64 kbit/s timeslots (3-36) carried per DSL frame, which sets the overall bit rate of the link; it must be large enough to cover the configured data rate plus any BRA voice timeslots, or the link raises a configuration alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6368.2.1.2.1.11 snmpwalk -v2c -c public <target> PEGASUS-MIB::dslLinkLineRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6368.2.1.2.1.11.1 snmpget -v2c -c public <target> PEGASUS-MIB::dslLinkLineRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6368.2.1.2.1.11.1 i <value>
Start monitoring Schmid Telecom Pegasus SDSL card/rack, DSL access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PEGASUS-MIB::dslLinkLineRate OID value, configure state conditions and alerts, and monitor any Schmid Telecom Pegasus SDSL card/rack, DSL access equipment from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6368 | schmidtelecom | PEGASUS-MIB |
| 1.3.6.1.4.1.6368.2 | pegasusMibModule | PEGASUS-MIB |
| 1.3.6.1.4.1.6368.2.1 | dsl | PEGASUS-MIB |
| 1.3.6.1.4.1.6368.2.1.2 | dslLinkTable | PEGASUS-MIB |
| 1.3.6.1.4.1.6368.2.1.2.1 | dslLinkEntry | PEGASUS-MIB |
| 1.3.6.1.4.1.6368.2.1.2.1.11 | dslLinkLineRate | PEGASUS-MIB |