All MIBs › PDN-SECURITY-MIB › devSecurityMgrValidation
devSecurityMgrValidation
Module: PDN-SECURITY-MIB
OID (symbolic): PDN-SECURITY-MIB::devSecurityMgrValidation
OID (numeric): 1.3.6.1.4.1.1795.2.24.2.8.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to either enable or disable SNMP IP validation. When enabled the first check on any incoming PDU is based on the IP address of the datagram. If the IP address is configured in the devSecurityMgrTable then the community name is checked. If the community name is correct then the lowest access level between the the Table and the community name is taken.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.8.1 snmpwalk -v2c -c public <target> PDN-SECURITY-MIB::devSecurityMgrValidation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1795.2.24.2.8.1.1 snmpget -v2c -c public <target> PDN-SECURITY-MIB::devSecurityMgrValidation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1795.2.24.2.8.1.1 i <value>
Start monitoring Paradyne DSL access multiplexer/network access device (management-plane access control) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the PDN-SECURITY-MIB::devSecurityMgrValidation OID value, configure state conditions and alerts, and monitor any Paradyne DSL access multiplexer/network access device (management-plane access control) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.8.1 | devSecurityMgrValidation | PDN-SECURITY-MIB |