All MIBs › OPS-MIB › iOpsIADVlAdminStatus
iOpsIADVlAdminStatus
Module: OPS-MIB
OID (symbolic): OPS-MIB::iOpsIADVlAdminStatus
OID (numeric): 1.3.6.1.3.1.1.1.2.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: This identifies the desired administrative status of the voice line. It is one of the following values:
'up-restore' - activate or restore the voice service 'down-remove' - deactivate or remove the voice service 'test-loopback' - initiate loopback test on the voice line The test result can be monitored by polling the 'iOpsIADVlLoopbackTestResult' object-type.
If this object is set to 'test-loopback(3)' on a voice line that is still running a previously initiated 'test-loopback(3)', a second (simultaneous) loopback test will not be invoked. In this case, the status of the line in test will be indicated by the 'iOpsIADVlLoopbackTestResult' object-type as 'test-inProgress(2)'.
What is iOpsIADVlAdminStatus?
This sets the desired state of the voice line: up-restore(1) to activate or restore service, down-remove(2) to deactivate it, or test-loopback(3) to run a loopback test whose outcome shows up in iOpsIADVlLoopbackTestResult. Setting test-loopback(3) while a previous test is still running does not start a second test; the line instead reports test-inProgress(2).
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.1 | clns | CLNS-MIB |
| 1.3.6.1.3.1.1 | clnp | CLNS-MIB |
| 1.3.6.1.3.1.1.1 | clnpForwarding | CLNS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.1.1.1.2 | iOpsIADVoiceService | OPS-MIB |
| 1.3.6.1.3.1.1.1.2.2 | iOpsIADVlTable | OPS-MIB |
| 1.3.6.1.3.1.1.1.2.2.1 | iOpsIADVlEntry | OPS-MIB |
| 1.3.6.1.3.1.1.1.2.2.1.6 | iOpsIADVlAdminStatus | OPS-MIB |