All MIBs › OPS-MIB › iOpsIADUpDownloadConfiguration
iOpsIADUpDownloadConfiguration
Module: OPS-MIB
OID (symbolic): OPS-MIB::iOpsIADUpDownloadConfiguration
OID (numeric): 1.3.6.1.3.1.1.1.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Is used to download the configuration file to the IAD, or to upload the configuration from the IAD, or to obtain status about the file download or upload:
1) The SNMP SET PDU message is used to initiate the download or upload of the configuration file. 2) The SNMP GET, GET-NEXT, or GET-BULK messages are used to obtain status of the previously initiated download or upload.
When initiating a download or upload, of the configuration file, the attributes of this object and the attributes of the 'iOpsIADSaveConfiguration' object-type must be included in the same SNMP SET PDU message.
The IP address of the server used to transfer the file or the status information is specified in iOpsIADServerIP.
The server used to download or upload the configuration file defaults to the TFTP protocol. However, this default may be changed to 'FTP' or to 'other'. It is specified in the 'iOpsIADServerType' object-type.
If an alternate transfer protocol is used, it must first be specified before attempting the file download.
If the IAD is unable to complete the file transfer for any reason, the values of the 'iOpsIADAdminStatus' and 'iOpsIADOperStatus' object-types must remain in the 'up' status in order for the IAD to be available to accept subsequent requests for configuration file downloads or uploads.
SET PDU message: 1: Download the configuration file from the server to the IAD. The configuration file name is specified in the 'iOpsIADConfigUpgradeFileName' object-type. 2: Upload the configuration script from the IAD to the server. he configuration file name is specified in the 'iOpsIADConfigUpgradeFileName' object-type.
GET, GET-NEXT, or GET-BULK PDU message: 3: The upload or download of the configuration file is complete. 4: The upload or download of the configuration file failed. 5: The download of the configuration file is in progress. 6: The upload of the configuration file is in progress. 7. No status can be returned because no prior SET operation was performed.
What is iOpsIADUpDownloadConfiguration?
This drives and reports on a configuration file transfer: an admin SETs downloadConfigFileFromServer(1) or uploadConfigFileToServer(2) to start the transfer named in iOpsIADConfigUpgradeFileName, then GETs back uploadOrDownloadComplete(3), uploadOrDownloadFailed(4), downloadInProgress(5), uploadInProgress(6), or none(7) for status. It must be included in the same SET PDU as iOpsIADSaveConfiguration when starting a transfer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.1.1.1.1.18 snmpwalk -v2c -c public <target> OPS-MIB::iOpsIADUpDownloadConfiguration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.1.1.1.1.18.1 snmpget -v2c -c public <target> OPS-MIB::iOpsIADUpDownloadConfiguration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.1.1.1.1.18.1 i <value>
Start monitoring ANDA Networks next-generation customer premises equipment (NG-CPE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OPS-MIB::iOpsIADUpDownloadConfiguration OID value, configure state conditions and alerts, and monitor any ANDA Networks next-generation customer premises equipment (NG-CPE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.1 | clns | CLNS-MIB |
| 1.3.6.1.3.1.1 | clnp | CLNS-MIB |
| 1.3.6.1.3.1.1.1 | clnpForwarding | CLNS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.1.1.1.1 | iOpsIADConfig | OPS-MIB |
| 1.3.6.1.3.1.1.1.1.18 | iOpsIADUpDownloadConfiguration | OPS-MIB |