All MIBs › OPS-MIB › iOpsIADSoftwareFileName
iOpsIADSoftwareFileName
Module: OPS-MIB
OID (symbolic): OPS-MIB::iOpsIADSoftwareFileName
OID (numeric): 1.3.6.1.3.1.1.1.1.10
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: Contains the name of the system image file that the IAD will attempt to boot from.
If IAD does not support multiple system image files, then this object becomes read-only and is only capable of containing the same file that is uploaded in the 'iOpsIADSoftwareUpgradeFileName' object-type.
This object only specifies the file name of the system image file residing on the IAD and not a full path name as is specified in the 'iOpsIADSoftwareUpgradeFileName' object-type.
The SNMP Agent will reject an SNMP SET PDU message on this object if the file does not exist on the IAD or if the file is otherwise invalid (incorrect name, corrupt, etc.).
What is iOpsIADSoftwareFileName?
This holds the name of the system image file the IAD will boot from; on a device that only supports one image file, this becomes read-only and mirrors whatever was uploaded via iOpsIADSoftwareUpgradeFileName. An admin's SET is rejected if the named file does not exist on the IAD or is otherwise invalid.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.1.1.1.1.10 snmpwalk -v2c -c public <target> OPS-MIB::iOpsIADSoftwareFileName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.1.1.1.1.10.1 snmpget -v2c -c public <target> OPS-MIB::iOpsIADSoftwareFileName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.1.1.1.1.10.1 s <value>
Start monitoring ANDA Networks next-generation customer premises equipment (NG-CPE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OPS-MIB::iOpsIADSoftwareFileName OID value, configure state conditions and alerts, and monitor any ANDA Networks next-generation customer premises equipment (NG-CPE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.1 | clns | CLNS-MIB |
| 1.3.6.1.3.1.1 | clnp | CLNS-MIB |
| 1.3.6.1.3.1.1.1 | clnpForwarding | CLNS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.1.1.1.1 | iOpsIADConfig | OPS-MIB |
| 1.3.6.1.3.1.1.1.1.10 | iOpsIADSoftwareFileName | OPS-MIB |