All MIBs › OPS-MIB › iOpsIADDownloadSoftware
iOpsIADDownloadSoftware
Module: OPS-MIB
OID (symbolic): OPS-MIB::iOpsIADDownloadSoftware
OID (numeric): 1.3.6.1.3.1.1.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Is used to download the system image file to the IAD or to obtain status about the file download:
1) The SNMP SET PDU message is used to initiate a download of the system image file to the IAD. 2) The SNMP GET, GET-NEXT, OR GET-BULK PDU messages are used to obtain status of the previously initiated download.
When initiating a download of the system image file, the attributes of this object and the attributes of the 'iOpsIADSaveSoftware' object-type must be included in the same SNMP SET PDU message.
'iOpsIADSaveSoftware' is used to specify either: 1) A save of the file on the IAD. 2) A save of the file on the IAD and then perform a reboot of the IAD.
The IP address of the server used to transfer the file or the status information is specified in the 'iOpsIADServerIP' object-type.
The server used to download the system image file defaults to the TFTP protocol. However, this default may be changed to 'FTP' or to 'other'. It is specified in the 'iOpsIADServerType' object-type.
If an alternate transfer protocol is used, it must first be specified before attempting the file download.
If the IAD is unable to complete the file transfer for any reason, the values of the 'iOpsIADAdminStatus' and 'iOpsIADOperStatus' object-types must remain in the 'up' status in order for the IAD to be available to accept subsequent system image file downloads.
SET PDU message: 1: Download the system image file from the server to the IAD. The system image file name is specified in the 'iOpsIADSoftwareUpgradeFileName' object-type.
GET, GET-NEXT, or GET-BULK PDU message: 2: The download of the system image file is complete. 3: The download of the system image file failed. 4: The download of the system image file is in progress. 5. No status can be returned because no prior SET operation was performed.
What is iOpsIADDownloadSoftware?
This drives and reports on a system image download: an admin SETs downloadSoftwareFromServer(1) to start pulling the file named in iOpsIADSoftwareUpgradeFileName, then GETs back downloadComplete(2), downloadFailed(3), downloadInProgress(4), or none(5) for status. It must be included in the same SNMP SET PDU as iOpsIADSaveSoftware when initiating a download.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.1.1.1.1.12 snmpwalk -v2c -c public <target> OPS-MIB::iOpsIADDownloadSoftware
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.1.1.1.1.12.1 snmpget -v2c -c public <target> OPS-MIB::iOpsIADDownloadSoftware.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.3.1.1.1.1.12.1 i <value>
Start monitoring ANDA Networks next-generation customer premises equipment (NG-CPE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OPS-MIB::iOpsIADDownloadSoftware OID value, configure state conditions and alerts, and monitor any ANDA Networks next-generation customer premises equipment (NG-CPE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.1 | clns | CLNS-MIB |
| 1.3.6.1.3.1.1 | clnp | CLNS-MIB |
| 1.3.6.1.3.1.1.1 | clnpForwarding | CLNS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.1.1.1.1 | iOpsIADConfig | OPS-MIB |
| 1.3.6.1.3.1.1.1.1.12 | iOpsIADDownloadSoftware | OPS-MIB |