All MIBs › OPS-MIB › iOpsIADAlarmStatus
iOpsIADAlarmStatus
Module: OPS-MIB
OID (symbolic): OPS-MIB::iOpsIADAlarmStatus
OID (numeric): 1.3.6.1.3.1.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Identifies the current alarm status of the IAD. If multiple alarms are present, this object displays the highest severity alarm value.
What is iOpsIADAlarmStatus?
This read-only value reports the IAD's current alarm severity: noAlarm(1), minorAlarm(2), majorAlarm(3), or criticalAlarm(4); when multiple alarms are active, this reports only the highest severity one, so an admin gets a quick worst-case health indicator without pulling every alarm individually.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.3.1.1.1.1.7 snmpwalk -v2c -c public <target> OPS-MIB::iOpsIADAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.3.1.1.1.1.7.1 snmpget -v2c -c public <target> OPS-MIB::iOpsIADAlarmStatus.1
Start monitoring ANDA Networks next-generation customer premises equipment (NG-CPE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OPS-MIB::iOpsIADAlarmStatus OID value, configure state conditions and alerts, and monitor any ANDA Networks next-generation customer premises equipment (NG-CPE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| 1.3.6.1.3.1 | clns | CLNS-MIB |
| 1.3.6.1.3.1.1 | clnp | CLNS-MIB |
| 1.3.6.1.3.1.1.1 | clnpForwarding | CLNS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.1.1.1.1 | iOpsIADConfig | OPS-MIB |
| 1.3.6.1.3.1.1.1.1.7 | iOpsIADAlarmStatus | OPS-MIB |