All MIBs › ONEACCESS-SHDSL-MIB › oacSHDSLSpanConfProfileMeansqCheck
oacSHDSLSpanConfProfileMeansqCheck
Module: ONEACCESS-SHDSL-MIB
OID (symbolic): ONEACCESS-SHDSL-MIB::oacSHDSLSpanConfProfileMeansqCheck
OID (numeric): 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The configured numbered of consecutive seconds where the noise margin is below
the configured threshold (oacSHDSLSpanConfProfileMeansqThreshold) after which the link will be retrained.
If the value is set to 0, than no retrain will occur based on noise margin verification.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
value 0 : meansq no
all other values: meansq check
What is oacSHDSLSpanConfProfileMeansqCheck?
The configured number of consecutive seconds the noise margin must stay below oacSHDSLSpanConfProfileMeansqThreshold before the line is retrained, from 0 (disabled) to 30; corresponds to the CLI 'meansq check <value>' / 'meansq no' commands.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.6 snmpwalk -v2c -c public <target> ONEACCESS-SHDSL-MIB::oacSHDSLSpanConfProfileMeansqCheck
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.6.1 snmpget -v2c -c public <target> ONEACCESS-SHDSL-MIB::oacSHDSLSpanConfProfileMeansqCheck.1
Start monitoring OneAccess CPE router with SHDSL WAN interface with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ONEACCESS-SHDSL-MIB::oacSHDSLSpanConfProfileMeansqCheck OID value, configure state conditions and alerts, and monitor any OneAccess CPE router with SHDSL WAN interface from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13191 | oneAccess | ONEACCESS-GLOBAL-REG |
| 1.3.6.1.4.1.13191.10 | oacExperimental | ONEACCESS-GLOBAL-REG |
| 1.3.6.1.4.1.13191.10.3 | oacExpInternalModules | ONEACCESS-GLOBAL-REG |
| 1.3.6.1.4.1.13191.10.3.3 | oacExpIMSystem | ONEACCESS-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13191.10.3.3.3 | oacSHDSLMIBModule | ONEACCESS-SHDSL-MIB |
| 1.3.6.1.4.1.13191.10.3.3.3.1 | oacSHDSLObjects | ONEACCESS-SHDSL-MIB |
| 1.3.6.1.4.1.13191.10.3.3.3.1.10 | oacSHDSLSpanConfProfileTable | ONEACCESS-SHDSL-MIB |
| 1.3.6.1.4.1.13191.10.3.3.3.1.10.1 | oacSHDSLSpanConfProfileEntry | ONEACCESS-SHDSL-MIB |
| 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.6 | oacSHDSLSpanConfProfileMeansqCheck | ONEACCESS-SHDSL-MIB |