All MIBs › ONEACCESS-SHDSL-MIB › oacSHDSLSpanConfProfileLineProbing
oacSHDSLSpanConfProfileLineProbing
Module: ONEACCESS-SHDSL-MIB
OID (symbolic): ONEACCESS-SHDSL-MIB::oacSHDSLSpanConfProfileLineProbing
OID (numeric): 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The configured linprobing mechanism.
- normal corresponds to the standard line probing (pmms) as defined in the standard (G.991.2).
- adaptive has to be used in situations where there is cross-talk between the lines of the same span.
A propriatary algorithm will be activated that will limit the maximum speed if the normal line probing
mechanism cannot reach a stable sync due to it's limitations (cross-talk is not taken into account in the
standard line probing mechanism). The disadvantage of the adaptive mode is that it can take a long time
before a stable sync is reached.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
lineprobing
What is oacSHDSLSpanConfProfileLineProbing?
Selects the line-probing method used when establishing sync: normal follows the standard G.991.2 probing, while adaptive uses a proprietary algorithm (at the cost of a slower sync) to cope with cross-talk between pairs on the same span that the standard method ignores.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.8 snmpwalk -v2c -c public <target> ONEACCESS-SHDSL-MIB::oacSHDSLSpanConfProfileLineProbing
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.8.1 snmpget -v2c -c public <target> ONEACCESS-SHDSL-MIB::oacSHDSLSpanConfProfileLineProbing.1
Start monitoring OneAccess CPE router with SHDSL WAN interface with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ONEACCESS-SHDSL-MIB::oacSHDSLSpanConfProfileLineProbing OID value, configure state conditions and alerts, and monitor any OneAccess CPE router with SHDSL WAN interface from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.13191 | oneAccess | ONEACCESS-GLOBAL-REG |
| 1.3.6.1.4.1.13191.10 | oacExperimental | ONEACCESS-GLOBAL-REG |
| 1.3.6.1.4.1.13191.10.3 | oacExpInternalModules | ONEACCESS-GLOBAL-REG |
| 1.3.6.1.4.1.13191.10.3.3 | oacExpIMSystem | ONEACCESS-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.13191.10.3.3.3 | oacSHDSLMIBModule | ONEACCESS-SHDSL-MIB |
| 1.3.6.1.4.1.13191.10.3.3.3.1 | oacSHDSLObjects | ONEACCESS-SHDSL-MIB |
| 1.3.6.1.4.1.13191.10.3.3.3.1.10 | oacSHDSLSpanConfProfileTable | ONEACCESS-SHDSL-MIB |
| 1.3.6.1.4.1.13191.10.3.3.3.1.10.1 | oacSHDSLSpanConfProfileEntry | ONEACCESS-SHDSL-MIB |
| 1.3.6.1.4.1.13191.10.3.3.3.1.10.1.8 | oacSHDSLSpanConfProfileLineProbing | ONEACCESS-SHDSL-MIB |