Nortel-MsCarrier-MscPassport-X25DteMIB :: mscX25DteRgLocalAddress

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-X25DteMIB › mscX25DteRgLocalAddress

mscX25DteRgLocalAddress

Module: Nortel-MsCarrier-MscPassport-X25DteMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DteRgLocalAddress

OID (numeric): 1.3.6.1.4.1.562.36.2.1.90.7.11.1.2

Node type: OBJECT-TYPE

Type: DigitString

Access: read-write

Description: This attribute contains the unique X.25 address which identifies this RemoteGroup. It should correspond to the called address in X.25 incoming call packets which are to be directed to this RemoteGroup. This allows calls received from the link to be directed to the appropriate RemoteGroup based on the called address in the X.25 call packet. The RemoteGroup components allow the X.25 interface to be shared amongst a number of Protocol Ports (and ultimately Virtual Routers) because each RemoteGroup is coupled with a specific ProtocolPort through its linkToProtocolPort attribute.

What is mscX25DteRgLocalAddress?

Unique X.25 address (1-15 digits) identifying this RemoteGroup, matched against incoming call packets' called address so calls can be routed to the right RemoteGroup.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.90.7.11.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DteRgLocalAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.90.7.11.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DteRgLocalAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.90.7.11.1.2.1 s <value>

Start monitoring Nortel MainStreet/Passport (MsCarrier Passport) WAN switch (X.25 DTE interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DteRgLocalAddress OID value, configure state conditions and alerts, and monitor any Nortel MainStreet/Passport (MsCarrier Passport) WAN switch (X.25 DTE interfaces) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.90mscX25DteNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.7mscX25DteRgNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.7.11mscX25DteRgProvTableNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.7.11.1mscX25DteRgProvEntryNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.7.11.1.2mscX25DteRgLocalAddressNortel-MsCarrier-MscPassport-X25DteMIB