Nortel-MsCarrier-MscPassport-X25DteMIB :: mscX25DtePleEncAddrToX25LkupFlrs

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-X25DteMIB › mscX25DtePleEncAddrToX25LkupFlrs

mscX25DtePleEncAddrToX25LkupFlrs

Module: Nortel-MsCarrier-MscPassport-X25DteMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DtePleEncAddrToX25LkupFlrs

OID (numeric): 1.3.6.1.4.1.562.36.2.1.90.6.11.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute indicates the number of times a translation attempt from an Encapsulation address to an X.25 address failed to find a corresponding X.25 address. Such a failure could occur when a Protocol Port, linked to a RemoteGroup via the linkToProtocolPort attribute of the RemoteGroup, requests through the software that a X.25 call be established to a particular Encapsulation address. If the RemoteGroup does not have a Peer component linked in its linkToPeer attribute list, with the encAddress attribute equal to the Encapsulation address specified, this counter will be incremented, because the corresponding Peer component needed to establish an X.25 connection was not found.

What is mscX25DtePleEncAddrToX25LkupFlrs?

Counts failed lookups translating an Encapsulation address to an X.25 address, which happen when no Peer component with a matching encAddress is linked to the relevant RemoteGroup.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.90.6.11.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DtePleEncAddrToX25LkupFlrs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.90.6.11.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DtePleEncAddrToX25LkupFlrs.1

Start monitoring Nortel MainStreet/Passport (MsCarrier Passport) WAN switch (X.25 DTE interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DtePleEncAddrToX25LkupFlrs OID value, configure state conditions and alerts, and monitor any Nortel MainStreet/Passport (MsCarrier Passport) WAN switch (X.25 DTE interfaces) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.90mscX25DteNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.6mscX25DtePleNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.6.11mscX25DtePleOpTableNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.6.11.1mscX25DtePleOpEntryNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.6.11.1.1mscX25DtePleEncAddrToX25LkupFlrsNortel-MsCarrier-MscPassport-X25DteMIB