Nortel-MsCarrier-MscPassport-X25DteMIB :: mscX25DtePLcnLinkToRemoteGroup

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-X25DteMIB › mscX25DtePLcnLinkToRemoteGroup

mscX25DtePLcnLinkToRemoteGroup

Module: Nortel-MsCarrier-MscPassport-X25DteMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DtePLcnLinkToRemoteGroup

OID (numeric): 1.3.6.1.4.1.562.36.2.1.90.3.10.1.4

Node type: OBJECT-TYPE

Type: Link

Access: read-write

Description: This attribute specifies the link to the RemoteGroup, indicating the RemoteGroup component with which this PermLcn component is associated. The RemoteGroup components logically divide up the X.25 Interface such that a number of Protocol Ports (and consequently a number of Virtual Routers) may share the same X.25 Interface into a Wide Area Network. In particular, the remote host identified by this PermLcn component is designated as belonging to the RemoteGroup linked by this attribute. The set of all PermLcn and Peer components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router).

What is mscX25DtePLcnLinkToRemoteGroup?

Links this PermLcn to a RemoteGroup, determining which Protocol Port/Virtual Router can reach the remote host over this permanent channel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.90.3.10.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DtePLcnLinkToRemoteGroup

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.90.3.10.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DtePLcnLinkToRemoteGroup.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.90.3.10.1.4.1 s <value>

Start monitoring Nortel MainStreet/Passport (MsCarrier Passport) WAN switch (X.25 DTE interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-X25DteMIB::mscX25DtePLcnLinkToRemoteGroup OID value, configure state conditions and alerts, and monitor any Nortel MainStreet/Passport (MsCarrier Passport) WAN switch (X.25 DTE interfaces) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.90mscX25DteNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.3mscX25DtePLcnNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.3.10mscX25DtePLcnProvTableNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.3.10.1mscX25DtePLcnProvEntryNortel-MsCarrier-MscPassport-X25DteMIB
1.3.6.1.4.1.562.36.2.1.90.3.10.1.4mscX25DtePLcnLinkToRemoteGroupNortel-MsCarrier-MscPassport-X25DteMIB