All MIBs › Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB › mscVsrSvsLCoOverrideRemoteName
mscVsrSvsLCoOverrideRemoteName
Module: Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVsrSvsLCoOverrideRemoteName
OID (numeric): 1.3.6.1.4.1.562.36.2.1.117.2.3.10.1.2
Node type: OBJECT-TYPE
Type: AsciiString
Access: read-write
Description: If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost.
What is mscVsrSvsLCoOverrideRemoteName?
If set while the current PLC remoteName is blank, this 0-40 character name overrides it once the service is locked/unlocked, letting an operator redirect a connection's remote endpoint immediately without a full 'activate prov'; the override is lost on a card/switch reset since it isn't persisted like a normally provisioned value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.117.2.3.10.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVsrSvsLCoOverrideRemoteName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.117.2.3.10.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVsrSvsLCoOverrideRemoteName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.117.2.3.10.1.2.1 s <value>
Start monitoring Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVsrSvsLCoOverrideRemoteName OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.117 | mscVsr | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.117.2 | mscVsrSvs | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.117.2.3 | mscVsrSvsLCo | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.117.2.3.10 | mscVsrSvsLCoPathDataTable | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.117.2.3.10.1 | mscVsrSvsLCoPathDataEntry | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.117.2.3.10.1.2 | mscVsrSvsLCoOverrideRemoteName | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |