Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB :: mscVRouteInterfaceSpeechHangoverTime

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB › mscVRouteInterfaceSpeechHangoverTime

mscVRouteInterfaceSpeechHangoverTime

Module: Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVRouteInterfaceSpeechHangoverTime

OID (numeric): 1.3.6.1.4.1.562.36.2.1.116.3.10.1.7

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. It is not used unless Vsr Svs Framer negotiatedSilenceSuppression is on, congested or slowAndCongested.

Higher values of speechHangoverTime reduce undesirable clipping but increase bandwidth usage.

speechHangoverTime is not used on DS1V, E1V, 1pDS1V, 1pE1V and J2MV cards.

What is mscVRouteInterfaceSpeechHangoverTime?

Time in ms (10-500, default 150) after speech ends before silence suppression kicks in on voice traffic; higher values reduce audible clipping at the cost of more bandwidth, and it's not used on DS1V/E1V/1pDS1V/1pE1V/J2MV cards.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.116.3.10.1.7
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVRouteInterfaceSpeechHangoverTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.116.3.10.1.7.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVRouteInterfaceSpeechHangoverTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.116.3.10.1.7.1 i <value>

Start monitoring Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVRouteInterfaceSpeechHangoverTime OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.116mscVRouteNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.116.3mscVRouteInterfaceNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.116.3.10mscVRouteInterfaceProvTableNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.116.3.10.1mscVRouteInterfaceProvEntryNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.116.3.10.1.7mscVRouteInterfaceSpeechHangoverTimeNortel-MsCarrier-MscPassport-VoiceNetworkingMIB