All MIBs › Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB › mscVRouteInterfaceIngressAudioGain
mscVRouteInterfaceIngressAudioGain
Module: Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVRouteInterfaceIngressAudioGain
OID (numeric): 1.3.6.1.4.1.562.36.2.1.116.3.10.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voice, modem and fax traffic. For example, ingress gain is applied to audio data coming from a PBX. If ingressAudioGain is negative, a loss is applied.
ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in a network to ensure that the signal level from any point in the network to any other point is correct.
ingressAudioGain is ignored for calls on 1pDS1V and 1pE1V cards. For calls running on these cards, ingress audio gain is not under the user's control and egress audio gain is determined by the audioGain attribute in the appropriate Vncs/m VoiceProfile/n.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.116.3.10.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVRouteInterfaceIngressAudioGain
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.116.3.10.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVRouteInterfaceIngressAudioGain.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.116.3.10.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscVRouteInterfaceIngressAudioGain.1
Start monitoring Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscVRouteInterfaceIngressAudioGain OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.116 | mscVRoute | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.116.3 | mscVRouteInterface | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.116.3.10 | mscVRouteInterfaceProvTable | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.116.3.10.1 | mscVRouteInterfaceProvEntry | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.116.3.10.1.1 | mscVRouteInterfaceIngressAudioGain | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |