Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB :: mscSigChanICmapTempFailureCause

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB › mscSigChanICmapTempFailureCause

mscSigChanICmapTempFailureCause

Module: Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscSigChanICmapTempFailureCause

OID (numeric): 1.3.6.1.4.1.562.36.2.1.115.18.100.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the cause code sent to the originating PBX when PORS fails to establish a call due to congestion or a disabled trunk. It is also generated when the calling side fails to decode payload capabilities sent by the called side. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 41.

VALUES (

128 = autoConfigure

)

What is mscSigChanICmapTempFailureCause?

Overrides the cause code (default autoConfigure, typically 41) sent to the originating PBX when a call fails due to congestion, a disabled trunk, or a payload-capability decode failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.115.18.100.1.3
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscSigChanICmapTempFailureCause

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.115.18.100.1.3.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscSigChanICmapTempFailureCause.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.115.18.100.1.3.1 i <value>

Start monitoring Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscSigChanICmapTempFailureCause OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.115mscSigChanNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.115.18mscSigChanICmapNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.115.18.100mscSigChanICmapIntCauseTableNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.115.18.100.1mscSigChanICmapIntCauseEntryNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.115.18.100.1.3mscSigChanICmapTempFailureCauseNortel-MsCarrier-MscPassport-VoiceNetworkingMIB