Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB :: mscSigChanICmapIncompatDestCause

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB › mscSigChanICmapIncompatDestCause

mscSigChanICmapIncompatDestCause

Module: Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscSigChanICmapIncompatDestCause

OID (numeric): 1.3.6.1.4.1.562.36.2.1.115.18.100.1.9

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the cause code sent to the originating PBX when the calling and called side capabilities do not match. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 88.

VALUES (

128 = autoConfigure

)

What is mscSigChanICmapIncompatDestCause?

Overrides the cause code (default autoConfigure, typically 88) sent to the originating PBX when the calling and called side capabilities are incompatible.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.115.18.100.1.9
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscSigChanICmapIncompatDestCause

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.115.18.100.1.9.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscSigChanICmapIncompatDestCause.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.115.18.100.1.9.1 i <value>

Start monitoring Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB::mscSigChanICmapIncompatDestCause OID value, configure state conditions and alerts, and monitor any Nortel Passport (MsCarrier) carrier voice/data switch (voice signaling topology) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.115mscSigChanNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.115.18mscSigChanICmapNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.115.18.100mscSigChanICmapIntCauseTableNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.115.18.100.1mscSigChanICmapIntCauseEntryNortel-MsCarrier-MscPassport-VoiceNetworkingMIB
1.3.6.1.4.1.562.36.2.1.115.18.100.1.9mscSigChanICmapIncompatDestCauseNortel-MsCarrier-MscPassport-VoiceNetworkingMIB