All MIBs › Nortel-MsCarrier-MscPassport-VoiceMIB › mscVsFramerOpRecentIngressLineSamples
mscVsFramerOpRecentIngressLineSamples
Module: Nortel-MsCarrier-MscPassport-VoiceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-VoiceMIB::mscVsFramerOpRecentIngressLineSamples
OID (numeric): 1.3.6.1.4.1.562.36.2.1.80.2.17.1.4
Node type: OBJECT-TYPE
Type: HexString
Access: read-only
Description: This attribute indicates two recent ingress line samples, represented as four hex digits. The first two hex digits give one sample. The last two hex digits give the other sample. If no call is up on this voice service's channel, each sample indicates the idle pattern sent by the adjoining PBX. Therefore, the two samples should be the same if no call is up on this voice service's channel. These samples should also be consistent each time recentIngressLineSamples is displayed, as long as no call is up on this voice service's channel. It indicates a fault on the PBX if the samples are not consistent when no call is up on this voice service's channel.
If no call is up on this VoiceService's channel and the two samples are the same, each sample gives the correct setting of the provisionable attribute endOfCallPattern. Note that endOfCallPattern is not used if this VoiceService is running on a DS1V, E1V, 1pDS1V, 1pE1V and J2MV card. On these cards, recentIngressLineSamples is always 0000.
What is mscVsFramerOpRecentIngressLineSamples?
Two recent samples (as 4 hex digits) of the ingress line signal; when no call is up, both samples should match and reflect the idle pattern -- if they differ with no call up, that points to a fault on the attached PBX.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.80.2.17.1.4 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceMIB::mscVsFramerOpRecentIngressLineSamples
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.80.2.17.1.4.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceMIB::mscVsFramerOpRecentIngressLineSamples.1
Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VoiceMIB::mscVsFramerOpRecentIngressLineSamples OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.80 | mscVs | Nortel-MsCarrier-MscPassport-VoiceMIB |
| 1.3.6.1.4.1.562.36.2.1.80.2 | mscVsFramer | Nortel-MsCarrier-MscPassport-VoiceMIB |
| 1.3.6.1.4.1.562.36.2.1.80.2.17 | mscVsFramerOperTable | Nortel-MsCarrier-MscPassport-VoiceMIB |
| 1.3.6.1.4.1.562.36.2.1.80.2.17.1 | mscVsFramerOperEntry | Nortel-MsCarrier-MscPassport-VoiceMIB |
| 1.3.6.1.4.1.562.36.2.1.80.2.17.1.4 | mscVsFramerOpRecentIngressLineSamples | Nortel-MsCarrier-MscPassport-VoiceMIB |