All MIBs › Nortel-MsCarrier-MscPassport-VoiceMIB › mscVsFramerMaxModemBitRate
mscVsFramerMaxModemBitRate
Module: Nortel-MsCarrier-MscPassport-VoiceMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-VoiceMIB::mscVsFramerMaxModemBitRate
OID (numeric): 1.3.6.1.4.1.562.36.2.1.80.2.12.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the maximum desired ingress rate used during modemFax and/or fax traffic.
Voice traffic is all traffic from the start of a call or speech until a 2100 Hz tone or call release. ModemFax traffic is all traffic after a 2100 Hz tone but before a fax preamble, speech or call release. Fax traffic is all traffic after a fax preamble but before speech or call release.
If modemFaxEncoding is g711G726, maxModemFaxG711G726Rate specifies the maximum rate used during modemFax traffic and fax traffic. If modemFaxEncoding is faxRelayG711G726, maxModemFaxG711G726Rate specifies the maximum rate used during modemFax traffic only. If modemFaxEncoding is faxRelayOnly or useVoiceEncoding, maxModemFaxG711G726Rate is ignored.
The negotiated maximum ingress modemFax and fax rates are available in negotiatedIgRates.
maxModemFaxG711G726Rate can be set to 16 or 24 only if this voice service is running on a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card.
What is mscVsFramerMaxModemBitRate?
The maximum desired ingress bit rate for modem and/or fax traffic when it is encoded with G.711/G.726 (as opposed to fax relay); which traffic phase this applies to depends on the modemFaxEncoding setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.80.2.12.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceMIB::mscVsFramerMaxModemBitRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.80.2.12.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VoiceMIB::mscVsFramerMaxModemBitRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.80.2.12.1.3.1 i <value>
Start monitoring Nortel MsCarrier Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VoiceMIB::mscVsFramerMaxModemBitRate OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.80 | mscVs | Nortel-MsCarrier-MscPassport-VoiceMIB |
| 1.3.6.1.4.1.562.36.2.1.80.2 | mscVsFramer | Nortel-MsCarrier-MscPassport-VoiceMIB |
| 1.3.6.1.4.1.562.36.2.1.80.2.12 | mscVsFramerCoderTable | Nortel-MsCarrier-MscPassport-VoiceMIB |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1 | mscVsFramerCoderEntry | Nortel-MsCarrier-MscPassport-VoiceMIB |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.3 | mscVsFramerMaxModemBitRate | Nortel-MsCarrier-MscPassport-VoiceMIB |