All MIBs › Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB › mscSigChanMcdnNetworkNameDisplay
mscSigChanMcdnNetworkNameDisplay
Module: Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB::mscSigChanMcdnNetworkNameDisplay
OID (numeric): 1.3.6.1.4.1.562.36.2.1.115.17.19.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This attribute specifies what Name Display is supported.
nd1 corresponds to the Meridian 1 RCAP (Remote CAPability) nd1. This translates as caller provides name info in SETUP, ringing party name in ALERTING, redirection name in NOTIFY, and answering party name in CONNECT (as applicable, and if the name changes).
nd2 corresponds to the Meridian 1 RCAP (Remote CAPability) nd2. This translates as caller provides name info in SETUP, answering party provides name in NOTIFY on answer.
nd3 corresponds to the Meridian 1 RCAP (Remote CAPability) nd3, which is nd1 plus name information in call clearing messages (busy user, etc.) where a specific user was found but either could not answer or cleared the call. This corresponds to the QSIG name display.
Description of bits: nameDisplay1(0) nameDisplay2(1) nameDisplay3(2)
What is mscSigChanMcdnNetworkNameDisplay?
Bitmask selecting which Meridian 1 Remote CAPability name-display level (nd1, nd2, or nd3) this channel supports for showing caller/answering-party names across the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.115.17.19.1.4 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB::mscSigChanMcdnNetworkNameDisplay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.115.17.19.1.4.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB::mscSigChanMcdnNetworkNameDisplay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.115.17.19.1.4.1 s <value>
Start monitoring Nortel MsCarrier Passport WAN switch (MCDN telephony signalling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB::mscSigChanMcdnNetworkNameDisplay OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport WAN switch (MCDN telephony signalling) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.115 | mscSigChan | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.115.17 | mscSigChanMcdn | Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB |
| 1.3.6.1.4.1.562.36.2.1.115.17.19 | mscSigChanMcdnCoTable | Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB |
| 1.3.6.1.4.1.562.36.2.1.115.17.19.1 | mscSigChanMcdnCoEntry | Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB |
| 1.3.6.1.4.1.562.36.2.1.115.17.19.1.4 | mscSigChanMcdnNetworkNameDisplay | Nortel-MsCarrier-MscPassport-VnetMcdnSigMIB |