All MIBs › Nortel-MsCarrier-MscPassport-VcTesterMIB › mscVctDnaDefaultTransferPriority
mscVctDnaDefaultTransferPriority
Module: Nortel-MsCarrier-MscPassport-VcTesterMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-VcTesterMIB::mscVctDnaDefaultTransferPriority
OID (numeric): 1.3.6.1.4.1.562.36.2.1.5130.2.11.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. It is overRidden by the transferPriority provisioned in the DLCI Direct Call sub- component.
The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority.
Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput).
When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput.
The default of defaultTransferPriority is normal.
What is mscVctDnaDefaultTransferPriority?
Sets the default transfer priority (normal or high, default normal) for outgoing calls on this Dna, which determines the trunk queue and routing metric used; high priority uses the delay-optimized routing metric while normal uses throughput-optimized routing. It is the modern replacement for the obsolete path-sensitivity attributes and can be overridden per DirectCall sub-component.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.5130.2.11.1.18 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VcTesterMIB::mscVctDnaDefaultTransferPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.5130.2.11.1.18.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VcTesterMIB::mscVctDnaDefaultTransferPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.5130.2.11.1.18.1 i <value>
Start monitoring Nortel Networks Magellan Passport switch (X.25/PVC virtual-circuit tester) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VcTesterMIB::mscVctDnaDefaultTransferPriority OID value, configure state conditions and alerts, and monitor any Nortel Networks Magellan Passport switch (X.25/PVC virtual-circuit tester) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.5130 | mscVct | Nortel-MsCarrier-MscPassport-VcTesterMIB |
| 1.3.6.1.4.1.562.36.2.1.5130.2 | mscVctDna | Nortel-MsCarrier-MscPassport-VcTesterMIB |
| 1.3.6.1.4.1.562.36.2.1.5130.2.11 | mscVctDnaOutgoingOptionsTable | Nortel-MsCarrier-MscPassport-VcTesterMIB |
| 1.3.6.1.4.1.562.36.2.1.5130.2.11.1 | mscVctDnaOutgoingOptionsEntry | Nortel-MsCarrier-MscPassport-VcTesterMIB |
| 1.3.6.1.4.1.562.36.2.1.5130.2.11.1.18 | mscVctDnaDefaultTransferPriority | Nortel-MsCarrier-MscPassport-VcTesterMIB |