Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB :: mscDpnGateUtpControlStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-UtpDpnTrunksMIBmscDpnGateUtpControlStatus

mscDpnGateUtpControlStatus

Module: Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB::mscDpnGateUtpControlStatus

OID (numeric): 1.3.6.1.4.1.562.36.2.1.61.2.11.1.6

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.

When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below is present.

The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics.

The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked.

The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked.

The value suspended indicates that the service has been administratively suspended.

Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)

What is mscDpnGateUtpControlStatus?

This read-only 1-byte bit map reports OSI control status conditions for the UTP component, such as subjectToTest, partOfServicesLocked, reservedForTest, or suspended; an empty set means either unsupported or no condition currently applies. Admins check this to understand why a UTP component's service is restricted even though it may appear administratively unlocked.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.2.11.1.6
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB::mscDpnGateUtpControlStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.2.11.1.6.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB::mscDpnGateUtpControlStatus.1

Start monitoring Nortel/Alcatel-Lucent Passport packet switch (UTP-based DPN trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB::mscDpnGateUtpControlStatus OID value, configure state conditions and alerts, and monitor any Nortel/Alcatel-Lucent Passport packet switch (UTP-based DPN trunk) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.61mscDpnGateNortel-MsCarrier-MscPassport-DpnTrunksMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.61.2mscDpnGateUtpNortel-MsCarrier-MscPassport-UtpDpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.2.11mscDpnGateUtpStateTableNortel-MsCarrier-MscPassport-UtpDpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.2.11.1mscDpnGateUtpStateEntryNortel-MsCarrier-MscPassport-UtpDpnTrunksMIB
1.3.6.1.4.1.562.36.2.1.61.2.11.1.6mscDpnGateUtpControlStatusNortel-MsCarrier-MscPassport-UtpDpnTrunksMIB