All MIBs › Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB › mscDpnGateUtpAlarmStatus
mscDpnGateUtpAlarmStatus
Module: Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB::mscDpnGateUtpAlarmStatus
OID (numeric): 1.3.6.1.4.1.562.36.2.1.61.2.11.1.7
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below is present.
The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component.
Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)
What is mscDpnGateUtpAlarmStatus?
This read-only 1-byte bit map reports OSI alarm status conditions for the UTP component: underRepair, critical, major, minor, or the generic alarmOutstanding; an empty set means either unsupported or no alarm currently applies. Admins use this to quickly triage the worst outstanding alarm severity against a specific UTP link component.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.2.11.1.7 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB::mscDpnGateUtpAlarmStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.61.2.11.1.7.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB::mscDpnGateUtpAlarmStatus.1
Start monitoring Nortel/Alcatel-Lucent Passport packet switch (UTP-based DPN trunk) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB::mscDpnGateUtpAlarmStatus OID value, configure state conditions and alerts, and monitor any Nortel/Alcatel-Lucent Passport packet switch (UTP-based DPN trunk) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.61 | mscDpnGate | Nortel-MsCarrier-MscPassport-DpnTrunksMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.61.2 | mscDpnGateUtp | Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.61.2.11 | mscDpnGateUtpStateTable | Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.61.2.11.1 | mscDpnGateUtpStateEntry | Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.61.2.11.1.7 | mscDpnGateUtpAlarmStatus | Nortel-MsCarrier-MscPassport-UtpDpnTrunksMIB |