All MIBs › Nortel-MsCarrier-MscPassport-TrunksMIB › mscTrkRemoteValidationAction
mscTrkRemoteValidationAction
Module: Nortel-MsCarrier-MscPassport-TrunksMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkRemoteValidationAction
OID (numeric): 1.3.6.1.4.1.562.36.2.1.60.101.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the action to be taken if there is a mismatch between the expectedRemoteNodeName attribute and the value received from the remote end. The remoteValidationAction determines the action when a value is supplied to the expectedRemoteNodeName attribute. If this attribute is provisioned to continue then upon an unsuccessful validation staging continues, otherwise, if disable is set then the Trunk does not continue to stage but, attempts to stage again after a one minute time out. All unsuccessful validation when the expectedRemoteNodeName has been set result in the generation of an alarm.
What is mscTrkRemoteValidationAction?
What happens if the remote node's staged name doesn't match mscTrkExpectedRemoteNodeName: continue(0, the default) lets staging proceed anyway, while disable(1) stops the Trunk from staging and retries after a one-minute timeout. Either way a mismatch raises an alarm, so an engineer chooses disable when wrong-neighbor connections must be actively blocked, not just logged.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.101.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkRemoteValidationAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.101.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkRemoteValidationAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.60.101.1.2.1 i <value>
Start monitoring Nortel MsCarrier Passport multiservice switch (WAN trunk provisioning/statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkRemoteValidationAction OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport multiservice switch (WAN trunk provisioning/statistics) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.60 | mscTrk | Nortel-MsCarrier-MscPassport-TrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.60.101 | mscTrkProvTable | Nortel-MsCarrier-MscPassport-TrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.60.101.1 | mscTrkProvEntry | Nortel-MsCarrier-MscPassport-TrunksMIB |
| 1.3.6.1.4.1.562.36.2.1.60.101.1.2 | mscTrkRemoteValidationAction | Nortel-MsCarrier-MscPassport-TrunksMIB |