Nortel-MsCarrier-MscPassport-TrunksMIB :: mscTrkOverrideRoundTripUsec

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-TrunksMIBmscTrkOverrideRoundTripUsec

mscTrkOverrideRoundTripUsec

Module: Nortel-MsCarrier-MscPassport-TrunksMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkOverrideRoundTripUsec

OID (numeric): 1.3.6.1.4.1.562.36.2.1.60.102.1.3

Node type: OBJECT-TYPE

Type: FixedPoint1

Access: read-write

Description: This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be reported to the routing system. If this value is changed on a Trunk or DpnGateway that is enabled, the LOCK and UNLOCK commands must be issued to the component to restage the override with the remote.

What is mscTrkOverrideRoundTripUsec?

An engineer-overridden round-trip link delay (ms, at 0.1ms resolution) reported to the routing system for metric calculations once successfully staged; a value of zero (the default) means only the measured delay is used. As with the transmit-speed override, changing it on an enabled Trunk requires a LOCK/UNLOCK cycle to restage with the remote.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.102.1.3
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkOverrideRoundTripUsec

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.102.1.3.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkOverrideRoundTripUsec.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.60.102.1.3.1 s <value>

Start monitoring Nortel MsCarrier Passport multiservice switch (WAN trunk provisioning/statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkOverrideRoundTripUsec OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport multiservice switch (WAN trunk provisioning/statistics) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.60mscTrkNortel-MsCarrier-MscPassport-TrunksMIB
1.3.6.1.4.1.562.36.2.1.60.102mscTrkOverridesTableNortel-MsCarrier-MscPassport-TrunksMIB
1.3.6.1.4.1.562.36.2.1.60.102.1mscTrkOverridesEntryNortel-MsCarrier-MscPassport-TrunksMIB
1.3.6.1.4.1.562.36.2.1.60.102.1.3mscTrkOverrideRoundTripUsecNortel-MsCarrier-MscPassport-TrunksMIB