Nortel-MsCarrier-MscPassport-TrunksMIB :: mscTrkExpectedRemoteNodeName

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-MsCarrier-MscPassport-TrunksMIBmscTrkExpectedRemoteNodeName

mscTrkExpectedRemoteNodeName

Module: Nortel-MsCarrier-MscPassport-TrunksMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkExpectedRemoteNodeName

OID (numeric): 1.3.6.1.4.1.562.36.2.1.60.101.1.1

Node type: OBJECT-TYPE

Type: AsciiString

Access: read-write

Description: This attribute specifies the expected node name of the module to which this Trunk is connected. Once entered, the node name must correspond to the Mod nodeName attribute of the remote node. The Trunk end points exchange their node name through the Trunk staging protocol. The staged value is validated and the remoteValidationAction will be executed for those values not matching the value supplied for this attribute. If this attribute is an empty string, then the comparison is always successful.

What is mscTrkExpectedRemoteNodeName?

The node name the far end of this Trunk is expected to present during the Trunk staging protocol's handshake; an empty string skips the check entirely. An engineer sets this to guard against a trunk accidentally staging up against the wrong remote Passport node, with mismatches handled per mscTrkRemoteValidationAction.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.101.1.1
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkExpectedRemoteNodeName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.101.1.1.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkExpectedRemoteNodeName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.60.101.1.1.1 s <value>

Start monitoring Nortel MsCarrier Passport multiservice switch (WAN trunk provisioning/statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-TrunksMIB::mscTrkExpectedRemoteNodeName OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier Passport multiservice switch (WAN trunk provisioning/statistics) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.60mscTrkNortel-MsCarrier-MscPassport-TrunksMIB
1.3.6.1.4.1.562.36.2.1.60.101mscTrkProvTableNortel-MsCarrier-MscPassport-TrunksMIB
1.3.6.1.4.1.562.36.2.1.60.101.1mscTrkProvEntryNortel-MsCarrier-MscPassport-TrunksMIB
1.3.6.1.4.1.562.36.2.1.60.101.1.1mscTrkExpectedRemoteNodeNameNortel-MsCarrier-MscPassport-TrunksMIB