Nortel-MsCarrier-MscPassport-PorsTrunksMIB :: mscTrkPaNegotiatedAtmMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-PorsTrunksMIB › mscTrkPaNegotiatedAtmMode

mscTrkPaNegotiatedAtmMode

Module: Nortel-MsCarrier-MscPassport-PorsTrunksMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-PorsTrunksMIB::mscTrkPaNegotiatedAtmMode

OID (numeric): 1.3.6.1.4.1.562.36.2.1.60.4.11.1.13

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute gives the actual value of PathAdmin Atm mode that the PathAdmin has decided on after negotiation with the far end PathAdmin. This is only applicable to ATM cards since the mode on non ATM hardware is not specified. The multiplexing mode implies that all voice traffic will be multiplexed onto the Atm atmConnection Vcc and all data will be multiplexed onto the Trunk Atm atmConnection Vcc. The mapping mode implies that each unique logical channel will be allocated its own Vcc. The mode notApplicable implies either this is not ATM hardware or that no Atm subcomponent exists under this or the peer PathAdmin.

What is mscTrkPaNegotiatedAtmMode?

Read-only ATM transport mode this PathAdmin negotiated with its peer: multiplexing(0) puts all voice/data onto shared VCCs, mapping(1) gives each logical channel its own VCC, and notApplicable(2) means this isn't ATM hardware or no ATM subcomponent exists.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.4.11.1.13
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsTrunksMIB::mscTrkPaNegotiatedAtmMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.60.4.11.1.13.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-PorsTrunksMIB::mscTrkPaNegotiatedAtmMode.1

Start monitoring Nortel MsCarrier MscPassport WAN switch (Packet-over-Ring Service trunks) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-PorsTrunksMIB::mscTrkPaNegotiatedAtmMode OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport WAN switch (Packet-over-Ring Service trunks) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.60mscTrkNortel-MsCarrier-MscPassport-TrunksMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.60.4mscTrkPaNortel-MsCarrier-MscPassport-PorsTrunksMIB
1.3.6.1.4.1.562.36.2.1.60.4.11mscTrkPaOperTableNortel-MsCarrier-MscPassport-PorsTrunksMIB
1.3.6.1.4.1.562.36.2.1.60.4.11.1mscTrkPaOperEntryNortel-MsCarrier-MscPassport-PorsTrunksMIB
1.3.6.1.4.1.562.36.2.1.60.4.11.1.13mscTrkPaNegotiatedAtmModeNortel-MsCarrier-MscPassport-PorsTrunksMIB