Nortel-MsCarrier-MscPassport-McsMgrMIB :: mscMcsMgrSecurity

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-McsMgrMIB › mscMcsMgrSecurity

mscMcsMgrSecurity

Module: Nortel-MsCarrier-MscPassport-McsMgrMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-McsMgrMIB::mscMcsMgrSecurity

OID (numeric): 1.3.6.1.4.1.562.36.2.1.122.10.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute enables or disables security for the McsManager. In the case of DPRS MCS Switched Paths, if security is set to on this node must have a DprsMcsEpGroup with the nsapAddress of the Addr subcomponent set to the same value as the node originating the call setup for the call to be accepted.If this attribute is set to off this node will accept DPRS MCS setup requests from any other node in the network. This attribute has no effect on the setup of FRF5 switched paths since an originating and terminating EP are required to establish an FRF5 switched path.

What is mscMcsMgrSecurity?

Enables or disables (default off) NSAP-address security checking for DPRS MCS switched-path setup requests; when on, incoming call setups must match this node's configured DprsMcsEpGroup NSAP address to be accepted, while FRF5 switched paths are unaffected. Turn this on if you want to restrict which nodes in the network can establish DPRS MCS paths to this one.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.10.1.5
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-McsMgrMIB::mscMcsMgrSecurity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.122.10.1.5.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-McsMgrMIB::mscMcsMgrSecurity.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.122.10.1.5.1 i <value>

Start monitoring Nortel/Alcatel-Lucent Passport ATM switch (multicast server manager) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-McsMgrMIB::mscMcsMgrSecurity OID value, configure state conditions and alerts, and monitor any Nortel/Alcatel-Lucent Passport ATM switch (multicast server manager) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.122mscMcsMgrNortel-MsCarrier-MscPassport-McsMgrMIB
1.3.6.1.4.1.562.36.2.1.122.10mscMcsMgrProvTableNortel-MsCarrier-MscPassport-McsMgrMIB
1.3.6.1.4.1.562.36.2.1.122.10.1mscMcsMgrProvEntryNortel-MsCarrier-MscPassport-McsMgrMIB
1.3.6.1.4.1.562.36.2.1.122.10.1.5mscMcsMgrSecurityNortel-MsCarrier-MscPassport-McsMgrMIB